TOTom Nelson Oder

Tom Nelson Oder

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tom Nelson Oder has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of deposition temperature on Mo/SiC Schottky contacts

    by Tom N. Oder, Sai B. Naredla

    We report on the results of our investigation of the effect of deposition temperature on molybdenum (Mo) used as Schottky contacts to fabricate silicon carbide (SiC) Schottky barrier diodes. The contacts were deposited using magnetron sputtering on n-type 4H-SiC at temperatures ranging from 25 to 900 °C. The fabricated diodes were characterized by current–voltage, current–voltage–temperature, and capacitance–voltage measurements. The diodes showed average Schottky barrier heights that decreased from 1.54 to 1.00 eV with increasing deposition temperature of the contacts. The average values of the ideality factors similarly decreased from 1.21 to 1.06 with increasing deposition temperature. However, the diodes with contacts deposited at 400–900 °C nearly maintained a constant ideality factor value of 1.06. The x-ray diffraction analysis indicated that silicides were formed at the interface for contacts deposited at or above 400 °C. The improved properties of the diodes with contacts deposited at higher temperatures are correlated with the formation of the interfacial alloys possessing improved electrical properties. This work demonstrates that high temperature deposition is another method for optimizing the properties of Mo contacts for the fabrication of 4H-SiC Schottky diodes for electronic applications in high power and high temperature environments.


  • Open Access

    Effects of deposition temperature on the electrical properties of Ti/SiC Schottky barrier diodes

    by Tom N. Oder, Krishna C. Kundeti, Nicholas Borucki, Sundar B. Isukapati

    Ti Schottky contacts were deposited on n-type 4H-SiC at different temperatures ranging from 28 oC to 900 oC using a magnetron sputtering deposition system to fabricate Schottky barrier diodes. Post deposition annealing at 500 oC for up to 60 hours in vacuum was carried to further improve the contact properties. Optimum barrier height of 1.13 eV and ideality factor of 1.04 was obtained in contacts deposited at 200 oC and annealed for 60 hours. Under a reverse voltage bias of 400 V, the average leakage current on these set of diodes was 6.6 x 10-8 A. Based on the x-ray diffraction analysis, TiC, Ti5Si3 and Ti3SiC2 were formed at the Ti/SiC interface. These results could be beneficial to improving the performance of 4H-SiC Schottky diodes for high power and high temperature applications.


  • Properties of ZnO Thin Films Codoped with Lithium and Phosphorus

    by Tom Nelson Oder, Andrew Smith, Mark Freeman, Michael Mcmaster, Bo Cai, Mim Lal Nakarmi


  • Improved Ni Schottky Contacts on n-Type 4H-SiC Using Thermal Processing

    by T. N. Oder, T. L. Sung, M. Barlow, J. R. Williams, A. C. Ahyi, T. Isaacs-Smith


  • Improved Schottky Contacts on n-Type 4H-SiC Using ZrB2 Deposited at High Temperatures

    by T.N. Oder, P. Martin, A.V. Adedeji, T. Isaacs-Smith, J.R. Williams


  • Time-resolved photoluminescence studies of Al-rich AlGaN alloys

    by Jing Li, Ki-Bum Nam, Tom Nelson Oder, KyoungHoon Kim, M. L. Nakarmi, Jing Y. Lin, Hongxing Jiang

    Si-doped n-type AlxGa1MINxN alloys with x up to 0.5 and Mg-doped p-type AlxGa1-xN alloys with x up to 0.27 were grown by metal-organic chemical vapor deposition (MOCVD) on sapphire substrates. For the n-type AlxGa1-xN, we achieved highly conductive alloys for x up to 0.5. An electron concentration as high as 1x1018cm-3 was obtained in Si-doped Al0.5Ga0.5N alloys with an electron mobility of 16 cm$_2)Vs at room temperature, as confirmed by Hall-effect measurements. Our results also revealed that the conductivity of AlxGa1-xN alloys continuously increases with an increase of Si doping level for a fixed value of Al content (X=0.4) to n- type conductivity is about 1 x 1018cm-3. Time- resolved photoluminescence studies carried out on these materials have shown that Si-doping reduces the effect of carrier localization in AlxGa1-xN alloys and a sharp drop in carrier localization energy occurs when the Si doping concentration increases above 1x1018cm-3, which directly correlates with the observed electrical properties. For the Mg-doped AlxGa1-xN alloys, p-type conduction was achieved for x up to 0.27, as confirmed by variable temperature Hall measurements. Emission lines of band-to-impurity transitions of free electrons with neutral Mg acceptors as well as localized excitons have been observed in the p-type AlxGa1-xN alloys. The Mg acceptor activation energies EA were deduces from photoluminescence spectra and were found to increase with Al content and agreed very well with those obtained by Hall measurements. From the measured activation energy as a function of Al content, EA versus x, the resistivity of Mg-doped AlxGa1-x with high Al contents can be deduced. Our results have also shown that PL measurements provide direct means of obtaining EA especially where this cannot be obtained accurately by electrical methods due to high resistance of p-type AlxGa1-xN with high Al content.