A Nine-Level Inverter With Single DC-Link and Low-Voltage Capacitors as Stacked Voltage Sources With Capacitor Voltage Control Irrespective of Load Power Factor
Open Access
- 26 September 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of the Industrial Electronics Society
- Vol. 3, 522-536
Abstract
This paper proposes a multilevel inverter topology with a single DC-link and series-connected capacitors as stacked voltage sources for multilevel voltage generation. The voltage deviation of a DC-link capacitor will occur whenever a phase terminal connects to the balanced neutral points (NPs: terminal joints of DC-link capacitors). On the contrary, if the voltage of a DC-link capacitor deviates from the nominal voltage, the same phase currents can be utilised to balance these neutral points. This new technique is being proposed for the first time in literature. Any voltage disturbance of the DC-link capacitors is balanced using the motor phase currents, irrespective of load power factor and modulation indices. For the balanced neutral points, whenever a phase connects to a neutral point, the other phase terminal tapping positions are varied on the DC-link to establish $i_{A}+i_{B}+i_{C}=0$ for that neutral point. The pole voltage level variation at motor phase terminals is undisturbed by adding extra cascaded H-bridges (CHBs) at each phase leg. The voltages of CHB capacitors are controlled conventionally by inverter pole voltage redundancies. The detailed experimental results for open-loop V/ f and closed-loop field-oriented control on an induction motor are presented using a nine-level laboratory prototype.Keywords
This publication has 30 references indexed in Scilit:
- Novel Symmetric Six-Phase Induction Motor Drive Using Stacked Multilevel Inverters With a Single DC Link and Neutral Point Voltage BalancingIEEE Transactions on Industrial Electronics, 2016
- Decoupled DC-Link Capacitor Voltage Control of DC–AC Multilevel Multileg ConvertersIEEE Transactions on Industrial Electronics, 2015
- Voltage balancing technique in a space vector modulated 5‐level multiple‐pole multilevel diode clamped inverterIET Power Electronics, 2015
- Voltage Balancing Approaches for Diode-Clamped Multilevel Converters Using Auxiliary Capacitor-Based CircuitsIEEE Transactions on Power Electronics, 2013
- A New Nine-Level Active NPC (ANPC) Converter for Grid Connection of Large Wind Turbines for Distributed GenerationIEEE Transactions on Power Electronics, 2011
- Multilevel Circuit Topologies Based on the Switched-Capacitor Converter and Diode-Clamped ConverterIEEE Transactions on Power Electronics, 2011
- Recent Advances and Industrial Applications of Multilevel ConvertersIEEE Transactions on Industrial Electronics, 2010
- The Common Cross-Connected Stage for the 5L ANPC Medium Voltage Multilevel InverterIEEE Transactions on Industrial Electronics, 2009
- DC Link Capacitor Voltage Balancing in a Three-Phase Diode Clamped Inverter Controlled by a Direct Space Vector of Line-to-Line VoltagesIEEE Transactions on Power Electronics, 2007
- Multilevel inverters: a survey of topologies, controls, and applicationsIEEE Transactions on Industrial Electronics, 2002