iSensMex-POT, a Potentiostat Platform for Human Health Applications
Authors:
- Gregorio Zamora-MejiaGZGregorio Zamora-Mejia
- Victor H. Carbajal-GomezVCVictor H. Carbajal-Gomez
- Luis C. Alvarez-SimonLALuis C. Alvarez-Simon
- Alejandro Silva-JuarezAlejandro Silva-Juarez
- Alejandro I. Bautista-CastilloABAlejandro I. Bautista-Castillo
- Sergio A. Rosales-NunezSRSergio A. Rosales-Nunez
- Jose M. Rocha-PerezJRJose M. Rocha-Perez
- Margarita Sanchez-DominguezMargarita Sanchez-Dominguez
- Daniel DuriniDDDaniel Durini
Open Access
- 11 November 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 169050-169068
Abstract
This work introduces the iSensMEX-POT platform, a potentiostat-based detection system for conducting cyclic voltammetry measurements. It consists of a mixed-mode application-specific integrated circuit (ASIC) and a user digital interface unit based on Raspberry/Python platform. The ASIC consists of three main building blocks: a potentiostat built by three operational amplifiers (OpAmps) working as an analog front-end, a 10-bit R2R digital-to-analog converter (DAC) and a 10-bit successive-approximation analog-to-digital converter (SAR-ADC) composing the mixed signal mode processing stage, and a digital finite state machine using the Inter-Integrated Circuit (I 2 C) protocol conforming the digital data processing and transmission section. The Raspberry controls the ASIC using the I 2 C, writes a digital words into the ASIC’s registers to replicate a triangular cyclic voltammetry signal with a scan rate of 200 mV/s over a range of ±1 V, and reads the digitized data from the SAR-ADC. The Raspberry platform displays the resulting waveform on a touch-screen using a graphical user interface (GUI). Also, a precision model based on the open-loop gain of the amplifier and an output noise quantification model were developed and applied to design a highly accurate potentiostat based on three amplifiers. The proposed platform’s functionality and accuracy was validated by comparing the data gathered by the iSensMex-POT with the data obtained with the EVAL-AD5940ELCZ commercial board. The proposed ASIC was mathematically modeled, simulated and fabricated in a 180 nm CMOS standard technology, featuring a silicon area of 1.39 mm 2 and a power consumption of 52.99 mW (16.05 mA @ 3.3 V).Keywords
Funding Information
- CONAHCyT-Mexico through the “Investigadoras e Investigadores por México” Program.
- “Estancias Posdoctorales por México” Program
This publication has 62 references indexed in Scilit:
- Ultrasensitive bacterial sensing using a disposable all-in-one amperometric platform with self-noise cancellationBiosensors and Bioelectronics, 2023
- Effect of in-situ transverse magnetic field on microstructure, mechanical properties and corrosion resistance of the directed energy deposited 316L stainless steelAdditive Manufacturing, 2023
- Abundant cilantro derived high surface area activated carbon (AC) for superior adsorption performances of cationic/anionic dyes and supercapacitor applicationChemical Engineering Journal, 2023
- High Pressure Rapid Synthesis of LiCrTiO4 with Oxygen Vacancy for High Rate Lithium‐Ion Battery AnodesSmall, 2022
- A new approach to HR monitoring using photoplethysmographic signals during intensive physical exercisePhysical and Engineering Sciences in Medicine, 2021
- High-performance all-inorganic portable electrochromic Li-ion hybrid supercapacitors toward safe and smart energy storageEnergy Storage Materials, 2020
- Solvate ionic liquid boosting favorable interfaces kinetics to achieve the excellent performance of Li4Ti5O12 anodes in Li10GeP2S12 based solid-state batteriesChemical Engineering Journal, 2020
- Solution‐Processed Laminated Perovskite Layers for High‐Performance Solar CellsAdvanced Functional Materials, 2019
- Simultaneous Cr(VI) reduction and bioelectricity generation in a dual chamber microbial fuel cellChemical Engineering Journal, 2018
- Fast and Controllable Electric‐Field‐Assisted Reactive Deposited Stable and Annealing‐Free Perovskite toward Applicable High‐Performance Solar CellsAdvanced Functional Materials, 2017