GZGregorio Zamora-Mejia

Gregorio Zamora-Mejia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Gregorio Zamora-Mejia has a total of 57 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    On the Feasibility of Implementing a Four-Quadrant CMOS Analog Multiplier Using Only Digital Inverter Standard-Cells as Building Blocks

    by Gregorio Zamora-Mejia, Victor H. Carbajal-Gomez, Alejandro Silva-Juarez, Luis C. Alvarez-Simon, Alejandro Diaz-Sanchez, Sergio A. Rosales-Nunez, Julio N. Hernandez-Perez, Rodrigo Jaramillo-Ramirez, Ernesto Conde-Almada, Alejandro I. Bautista-Castillo, et al.

    This work introduces the first four-quadrant CMOS analog multiplier circuit built entirely from digital inverter standard cells, without requiring any analog transistor-sizing methodologies. The multiplication operation is performed using a quadratic cancellation scheme in conjunction with a modified high-speed Nauta transconductor, which serves as summing point circuit. Consequently, the proposed multiplier achieves bandwidths of 2.2 GHz with x1 inverter cells and 3.8 GHz with x12 inverter cells, respectively. Additionally, the output offset issue is addressed by the same summing-point circuit. The power and silicon area consumption of both multipliers are 0.423 mW/( $7.6~\mu $ m $\times 14.73~\mu $ m) and 5.075 mW/( $17.8~\mu $ m $\times 14.73~\mu $ m), respectively. Mathematical modeling and post-layout transistor-level simulations using a TSMC 65 nm CMOS process, with a BSIM4 level 54 model, successfully validate the proposed multiplier. Finally, because the multiplication architecture is entirely composed of CMOS inverters (NOT gates), this circuit can be implemented and scaled for any advanced technology node that includes a digital standard-cell library.

  • A 180-nm CMOS fully digital chaotic Lorenz system

    by Alejandro Silva-Juarez, Sergio A. Rosales-Nunez, Luis C. Alvarez-Simon, Gregorio Zamora-Mejia, Julio Hernandez-Perez, Victor H. Carbajal-Gomez, Jose M. Rocha-Perez, Alejandro I. Bautista-Castillo


  • Open Access

    FPGA-Based Quantized 1D-CNN for Real-Time Mechanical Unbalance Classification in Rotating Machinery

    by Alejandro Silva-Juárez, Daniel Clemente-López, Gregorio Zamora-Mejía, Victor H. Carbajal-Gómez, Luis C. Alvarez-Simón, Sergio A. Rosales-Nunez, Julio Hernandez-Perez, Alejandro I. Bautista-Castillo, Jose M. Rocha-Perez, Daniel Durini

  • A Low‐Power, Highly Tunable Ring Oscillator Architecture Based on a QFGT‐Modified Maneatis Cell

    by Joselyn Mayte Fernandez‐Martinez, Gregorio Zamora‐Mejia, Esteban Tlelo‐Cuautle, Alejandro Diaz‐Sanchez

    The proposed work introduces a low‐power ring oscillator architecture that achieves enhanced tunability by incorporating quasi‐floating gate transistors (QFGTs) into a modified Maneatis delay cell. The proposed CMOS design features a local feedback mechanism at the load node, which establishes a summing point at the complemented output through the QFGTs configuration. The capacitive divider ratio associated with the QFGT structure defines a programmable feedback factor ( ), allowing flexible control of the phase delay and consequently of the oscillation frequency. The proposed circuit is mathematically modeled and validated through simulations using a TSMC 180 nm CMOS process. Evaluations are performed through 500‐run Monte Carlo simulations and analyses of process corner variations to assess robustness.

  • Simulation of fractional order chaotic oscillators applying the Grünwald–Letnikov definition and the Adams–Bashforth–Moulton method

    by Alejandro Silva-Juarez, Sergio A. Rosales-Nunez, Luis C. Alvarez-Simon, Gregorio Zamora-Mejia, Victor H. Carbajal-Gomez, Alejandro I. Bautista-Castillo, Jose M. Rocha-Perez


  • MexSIC, a Data Acquisition Channel for SiPMs

    by Daniel Durini, Gregorio Zamora-Mejia, Jose M. Rocha-Perez, Victor H. Carbajal-Gomez, Alejandro I. Bautista-Castillo, Sergio A. Rosales-Nunez, Alejandro Silva-Juarez, Luis C. Alvarez-Simon, Alejandro Diaz-Sanchez, Ruben Alfaro-Molina, et al.

    This work describes MexSIC, a data acquisition channel designed for Silicon Photomultipliers (SiPMs), composed of a mixed-mode application specific integrated circuit (ASIC) front-end, an FPGA-based processing stage, and a user interface. The ASIC provides a 1-bit sigma-delta modulated (ΣΔ – M ) digital equivalent of the input SiPM current, a flag indicating the start/end of the SiPM pulse, and a clock reference generated by an internal Phase Locked Loop (PLL). At the ASIC input stage, the SiPM current is converted to voltage by means of a 1.57 GHz bandwidth transimpedance amplifier (TIA), the gain of which can be switched between 21 dB and 48 dB, allowing for an input current range between 20 μ A and 20 mA. The generated voltage signal is then fed to a Triggering Unit (TU) implemented to discriminate between desired signals and the spurious ones, and in parallel, also to a second-order ΣΔ modulator providing 6.1 Equivalent Number Of Bits (ENOB). The TU circuit sends a start/end bit flag by comparing the SiPM voltage signal with an 8-bit programmable voltage reference. The ΣΔ was selected to have a single output line instead of using a data bus with many lines, which is important in applications where the number of SiPM channels being read out is very large. The 10 MHz bandwidth ΣΔ – M uses an Over Sampling Ratio (OSR) of 50, and a 1 GHz sampling clock that is generated by a PLL using an off-chip 100 MHz reference. The FPGA receives the ASIC ΣΔ modulated output signal and performs a decimation process by means of a Cascade Integrator Comb (CIC) filter to complete the data recovery. The recovered signal is visualized in a Matlab programmed Graphical User Interface (GUI). The MexSIC ASIC was designed in a 180 nm CMOS standard process using Cadence © software, and the processing stage was implemented in a Kintex-7 FPGA.

  • Open Access

    iSensMex-POT, a Potentiostat Platform for Human Health Applications

    by Gregorio Zamora-Mejia, Victor H. Carbajal-Gomez, Luis C. Alvarez-Simon, Alejandro Silva-Juarez, Alejandro I. Bautista-Castillo, Sergio A. Rosales-Nunez, Jose M. Rocha-Perez, Francisco Barbosa-Escudero, Margarita Sanchez-Dominguez, Daniel Durini

    This work introduces the iSensMEX-POT platform, a potentiostat-based detection system for conducting cyclic voltammetry measurements. It consists of a mixed-mode application-specific integrated circuit (ASIC) and a user digital interface unit based on Raspberry/Python platform. The ASIC consists of three main building blocks: a potentiostat built by three operational amplifiers (OpAmps) working as an analog front-end, a 10-bit R2R digital-to-analog converter (DAC) and a 10-bit successive-approximation analog-to-digital converter (SAR-ADC) composing the mixed signal mode processing stage, and a digital finite state machine using the Inter-Integrated Circuit (I 2 C) protocol conforming the digital data processing and transmission section. The Raspberry controls the ASIC using the I 2 C, writes a digital words into the ASIC’s registers to replicate a triangular cyclic voltammetry signal with a scan rate of 200 mV/s over a range of ±1 V, and reads the digitized data from the SAR-ADC. The Raspberry platform displays the resulting waveform on a touch-screen using a graphical user interface (GUI). Also, a precision model based on the open-loop gain of the amplifier and an output noise quantification model were developed and applied to design a highly accurate potentiostat based on three amplifiers. The proposed platform’s functionality and accuracy was validated by comparing the data gathered by the iSensMex-POT with the data obtained with the EVAL-AD5940ELCZ commercial board. The proposed ASIC was mathematically modeled, simulated and fabricated in a 180 nm CMOS standard technology, featuring a silicon area of 1.39 mm 2 and a power consumption of 52.99 mW (16.05 mA @ 3.3 V).


  • Open Access

    A Reconfigurable-Band Analog Filter Standard-Cell Based on Differential/Single Input Signaling

    by Alejandro Diaz-Sanchez, Gregorio Zamora-Mejia, Jose M. Rocha-Perez, Jose L. Vazquez-Gonzalez, Uriel G. Zapata-Rodriguez

    This work presents a reconfigurable-band analog filter capable of performing the low-pass, high-pass, band-pass or all-pass functions. The proposed filter is a simple and compact cell composed of only two RC networks and one differential Operational Transconductance Amplifier (OTA). To select the desired filter type, two configurations must be done: 1) the two RC network shall be configured as low-pass/low-pass, high-pass/high-pass or low-pass/high-pass, 2) the input signals must be fed in differential or single mode. To validate theory and simulations, the proposed reconfigurable-band filter was designed, fabricated and measured to meet the biomedical band (0.1 Hz - 10 kHz) in a $0.5 ~\mu \text{m}$ CMOS standard fabrication process. To achieve the extremely low RC time constants imposed by the biomedical band, the R element was implemented using PMOS high-value programmable resistor. The prototype exhibits a silicon area of $470 ~\mu \text{m}$ x $250 ~\mu \text{m}$ and a power consumption of $96.32 ~\mu \text{W}$ using a ± 0.8 V symmetric power supply. Due to this circuit’s ability to perform four filter-functions, its operation band can be tuned over five decades, its power consumption is in the nano and micro-watt regime, and it is area compact, the proposed analog filter is a suitable candidate for being an analog standard-cell.


  • Open Access

    A Self-Powered UHF Passive Tag for Biomedical Temperature Monitoring

    by Gregorio Zamora-Mejia, Jaime Martinez-Castillo, Alejandro Diaz-Sanchez, Jose M. Rocha-Perez, Agustín L. Herrera-May, Uriel G. Zapata-Rodriguez, Victor H. Carbajal-Gomez

    Self-powered RF passive sensors have potential application in temperature measurements of patients with health problems. Herein, this work presents the design and implementation of a self-powered UHF passive tag prototype for biomedical temperature monitoring. The proposed battery-free sensor is composed of three basic building blocks: a high-frequency section, a micro-power management stage, and a temperature sensor. This passive temperature sensor uses an 860 MHz to 960 MHz RF carrier and a 1 W Effective Isotropic Radiated Power (EIRP) to harvest energy for its operation, showing a read range of 9.5 m with a 13.75 µW power consumption, and an overall power consumption efficiency of 10.92% was achieved. The proposed device can measure temperature variations between 0 °C and 60 °C with a sensitivity of 823.29 Hz/°C and a standard error of 13.67 Hz/°C over linear regression. Circuit functionality was validated by means of post-layout simulations, characterization, and measurements of the manufactured prototype. The chip prototype was fabricated using a 0.18 µm CMOS standard technology with a silicon area consumption of 1065 µm × 560 µm. The overall size of the self-powered passive tag is 8 cm × 2 cm, including both chip and antenna. The self-powered tag prototype could be employed for human body temperature monitoring.


  • A 0.18 μm CMOS capacitor-less Low-Drop Out Voltage Regulator Compensated via the Bootstrap Flipped-Voltage Follower

    by Gregorio Zamora-Mejia, Dario Edwin Gomez-Garcia, Huber Giron-Nieto, Jaime Martinez-Castillo, Luis Armando Moreno-Coria, Jose Miguel Rocha-Perez, Alejandro Diaz-Sanchez