Conduit design with expanding diameter for enhanced flow
Authors:
Open Access
- 23 June 2023
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 13 (1) , 1-9
Abstract
Conduits are commonly used for treating lesions in arteries and veins. The conventional stents are cylindrical in shape, which increases flow resistance with length. This study presents a design of stents and conduits where the conduit caliber expands gradually to reduce resistance while avoiding flow separation. Inflow was provided from a header tank at two different pressures (i.e., 10 and 25 mm Hg pressure) into a cylindrical or expanding conduit. The initial conduit calibers were 2-, 3-, 4-, and 5-mm and 160-, 310-, and 620-mm lengths in each case. The flow rates of expanding caliber conduits (at a rate of r4–6/cm where r is the initial conduit radius) were compared to traditional cylindrical conduits of constant radius. The expanded caliber yields a significantly increased flow of 16–55% for R4/L expansion, 9–44% for R5/L expansion, and 1–28% for R6/L expansion. Simulated flow models using computational fluid dynamics (CFD) were used to validate and expand the experimental findings. Flow separation was detected for certain simulations by flow pathlines and wall shear stress (WSS) calculations. The results showed that a caliber expansion rate of r6/cm is the optimal rate of expansion for most potential applications with minimum flow separation, lower resistance, and increased flow.Keywords
This publication has 14 references indexed in Scilit:
- Accounting for residence-time in blood rheology models: do we really need non-Newtonian blood flow modelling in large arteries?Journal of The Royal Society Interface, 2018
- Open surgical removal of iliac vein Wallstents with excision of pseudointima obstructing the contralateral iliac veinJournal of Vascular Surgery: Venous and Lymphatic Disorders, 2016
- Biomechanical Modeling to Improve Coronary Artery Bifurcation StentingJACC: Cardiovascular Interventions, 2015
- Study of the Dump Diffuser Optimization for Gas Turbine CombustorsProcedia Engineering, 2015
- A validated predictive model of coronary fractional flow reserveJournal of The Royal Society Interface, 2011
- Hemodynamically Driven Stent Strut DesignAnnals of Biomedical Engineering, 2009
- Techniques for Insertion and Management of ComplicationsAnnals of Surgery, 1987
- New approaches to the diagnosis and treatment of venous obstruction.1986
- New approaches to the diagnosis and treatment of venous obstructionJournal of Vascular Surgery, 1986
- Optimality principles in arterial branchingJournal of Theoretical Biology, 1976