Enhanced interlaminar mechanical behavior of advanced fiber metal laminates via nano Al2O3‐IPN formation and surface pre‐treatments
- 24 June 2023
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 44 (9) , 5514-5526
Abstract
The inferior delamination resistance and out‐of‐plane performance of fiber metal laminates (FMLs) are of serious concerns. This work employs two modification methods, namely metal surface's chemical pre‐treatment and nano Al2O3 embedded interpenetrating polymer network (IPN) formation for improving the delamination resistance of aluminum and glass fiber‐reinforced polymer (GFRP) composite‐based FMLs. The synergetic effect of the two modification techniques resulted in high degrees of improvement in delamination resistance that were ~28% for critical strain energy release rate during mode‐I interlaminar fracture toughness (ILFT), that is (GIC) and ~37% for GIIC. Simultaneously, the flexural strength, tensile strength, and interlaminar shear strength improved by ~23%, ~17%, and ~24%, respectively. Scanning electron microscopy, atomic force microscopy, and surface energy measurement studies showed that the chemical pre‐treatment significantly influenced the surface morphology, surface roughness, and surface energy responses of aluminum, respectively. Fractographic study validated the effect of modification methods on the failure behavior under various testing modes.Keywords
Funding Information
- Anusandhan National Research Foundation (ECR/2018/001241)
This publication has 45 references indexed in Scilit:
- Improvement of adhesion performance between aluminum alloy sheet and epoxy based on anodizing techniqueInternational Journal of Adhesion and Adhesives, 2016
- Mode I and Mode II interlaminar fracture toughness of composite laminates interleaved with electrospun nanofibre veilsComposites Part A: Applied Science and Manufacturing, 2015
- Mixed Mode interlayer fracture of glass fiber/nano-enhanced epoxy compositesComposites Part A: Applied Science and Manufacturing, 2014
- A review: Fibre metal laminates, background, bonding types and applied test methodsMaterials & Design (1980-2015), 2011
- Effect of surface pre-treatment on the adhesive strength of epoxy–aluminium jointsInternational Journal of Adhesion and Adhesives, 2009
- Epoxy composites using functionalized alumina platelets as reinforcementsComposites Science and Technology, 2008
- Development of Fibre Metal Laminates: concurrent multi-scale modeling and testingJournal of Materials Science, 2006
- Curing behaviour of IPNs formed from model VERs and epoxy systems I amine cured epoxyPolymer, 2001
- Determination of alpha and beta alumina in ceramic alumina by X-ray diffractionSpectrochimica Acta Part B: Atomic Spectroscopy, 2000
- A THEORY FOR ESTIMATION OF SURFACE AND INTERFACIAL ENERGIES. III. ESTIMATION OF SURFACE ENERGIES OF SOLIDS FROM CONTACT ANGLE DATAThe Journal of Physical Chemistry, 1960