Different Behaviors of Friction in Open and Closed Forging Test Utilizing Palm Oil-Based Lubricants
Open Access
- 6 March 2023
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 11 (3) , 114
Abstract
Increasing demand for manufactured goods in industries such as automobiles, electronics, construction, and aerospace has motivated researchers to develop sustainable manufacturing processes. Most metal-forming lubricants are not eco-friendly; they may cause substantial chemical emissions and constitute a community threat. Bio-oil lubricants are seen as possible replacements for mineral oil-based lubricants. Computational modelling of the forging process uses the finite element method to accelerate and improve design. This research intends to act as a case study and demonstrate how friction behaves differently in open-closed forging tests of different palm oil derivatives. The relationship between the different types of friction was studied using a cold forging test in conjunction with the development of a Coulomb–Tresca friction model. From the results, it can be shown that the friction behavior for the closed forging test (CFT) and the ring compression test (RCT) differs; the CFT exhibits a diversified friction adaptation, while the RCT exhibits a single friction adaptation. From both tests, palm stearin (PS) shows the lowest friction behavior where at RCT the friction is estimated at m = 0.10/μ = 0.05 and the CFT has a varied friction and the average friction is estimated at m = 0.352/μ = 0.1626. On the other hand, commercial metal-forming oil (CMFO) shows the highest lubrication sample in friction, where the value of friction is similar to the no lubricant sample (NA-O), which is (m = 0.45/μ = 0.1875) on the RCT test and (m = 0.424/μ = 0.1681) on the CFT test.Keywords
Funding Information
- UTM Fundamental Research Grant (22H46)
- Konsortium Kecemerlangan Penyelidikan 2021 (4L961)
This publication has 32 references indexed in Scilit:
- A New Approach Using Palm Olein, Palm Kernel Oil, and Palm Fatty Acid Distillate as Alternative Biolubricants: Improving Tribology in Metal-on-Metal ContactTribology Transactions, 2015
- In Situ Study of Model Organic Friction Modifiers Using Liquid Cell AFM; Saturated and Mono-unsaturated Carboxylic AcidsTribology Letters, 2015
- Paraffinic mineral oil lubrication for cold forward extrusion: Effect of lubricant quantity and frictionTribology International, 2013
- Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loadsJournal of Zhejiang University-SCIENCE A, 2012
- Biodiesel Production from Crude Jatropha curcas L. Oil with Trace Acid CatalystChinese Journal of Chemical Engineering, 2012
- Low-temperature flow behaviour of vegetable oil-based lubricantsIndustrial Crops and Products, 2012
- Experimental Evaluation of Refined, Bleached, and Deodorized Palm Olein and Palm Stearin in Cold Extrusion of Aluminum A1050Tribology Transactions, 2012
- Vegetable‐based biodegradable lubricating oil additivesIndustrial Lubrication and Tribology, 2003
- A new evaluation to friction analysis for the ring testInternational Journal of Machine Tools and Manufacture, 2001
- Analysis of Long-Chain Fatty Acids by Gas-Liquid ChromatographyAnalytical Chemistry, 1959