Abstract
In dynamic wireless power transfer systems, long segmented transmitter couplers facilitate simplified control and mitigate voltage fluctuations. However, dynamic capacitive power transfer (CPT) systems typically operate in the MHz range, where the high-frequency excitation wavelength is comparable to the dimensions of long segmented transmitter plates. This induces significant transmission line effects (TLE) in the system couplers, resulting severe electric-field inhomogeneity and even near-zero-field regions. These issues severely constrain the system’s power transfer capacity and stability. This article develops a mathematical model for dynamic CPT systems accounting for the TLE in long segmented transmitter plates, and analyzes the electric-field distribution around transmitter plates as well as the receiver output characteristics. It also proposes an open-loop output voltage fluctuation suppression method based on switchable terminal reactance, along with a corresponding terminal reactance parameters optimization method and switching strategy. Integrated with the transmitter’s DC–DC converter, it enables closed-loop control of output voltage. An experimental prototype was built with an operating frequency of 6.78 MHz, 10 m-long transmitter plates, and a system power of 30 W. Experimental results demonstrate distinct near-zero-power operation intervals in the output voltage without terminal reactance, with the voltage fluctuation rate approaching nearly 100%. Adopting the proposed method reduces the open-loop output voltage fluctuation rate to 30.1%, and implementing closed-loop control further decreases it to within 5%. The fluctuation trends and amplitudes of the system output voltage before and after using the proposed method are consistent with theoretical values, verifying that the proposed method realizes stable constant-voltage output across all segments of dynamic CPT systems.
Funding Information
  • National Natural Science Foundation of China (52477016)

This publication has 24 references indexed in Scilit: