Critical Assessment of the Bonded Single Lap Joint Exposed to Cyclic Tensile Loading
Open Access
Abstract
Single shear or single lap joints are the most prevalent type of adhesive joints used in advanced engineering applications, where they are exposed to fatigue loadings in their services. Although their mechanical performances under static loading have been investigated extensively, the studies related to the fatigue performances were limited. For that purpose, single lap joints’ (SLJs) reaction to fatigue tensile loading was studied by varying the adherend thickness (3 mm to 6 mm) and fatigue load (3250 N to 1500 N). ABAQUS/Standard was used to create its advanced FE model. To represent the progressive damage in the adhesive layer, the fatigue damage model via the Paris Law, which links the rate of the crack expansion to the strain energy release rate (SERR), was integrated into the cohesive zone model with bi-linear traction–separation characteristics. The model was written in a UMAT subroutine. The developed model was validated using experimental data from the literature. The crack initiation cycle (Ni), the failure cycle (Nf), the fatigue load limit, the strain energy release rate, the crack propagation rate, and variation of stress components with their dependency to design parameters were investigated in depth. It was found that the service life of the SLJs with thicker adherends was more responsive to the amount of stress applied. When exposed to lesser loads, the SLJs’ life span changed more noticeably.Keywords
Funding Information
- American University of the Middle East, Kuwait
This publication has 26 references indexed in Scilit:
- Effect of adhesive thickness on fatigue and fracture of toughened epoxy joints – Part I: ExperimentsEngineering Fracture Mechanics, 2011
- Predicting fatigue damage in adhesively bonded joints using a cohesive zone modelInternational Journal of Fatigue, 2010
- Load Ratio Effect on the Fatigue Behaviour of Adhesively Bonded Joints: An Enhanced Damage ModelThe Journal of Adhesion, 2010
- A Two-Dimensional Approach of Single-Lap Adhesive Bonded JointsMechanics of Advanced Materials and Structures, 2009
- Simulation of delamination in composites under high-cycle fatigueComposites Part A: Applied Science and Manufacturing, 2007
- A damage model for the simulation of delamination in advanced composites under variable-mode loadingMechanics of Materials, 2006
- Life prediction of bonded joints in composite materialsInternational Journal of Fatigue, 2006
- Fatigue degradation modelling of plain woven glass/epoxy compositesComposites Part A: Applied Science and Manufacturing, 2001
- Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatusComposites Science and Technology, 1996
- Strength Predictions for Lap Joints, Especially with Composite Adherends. A ReviewThe Journal of Adhesion, 1989