Critical Crevice Temperature of 2205 Duplex Stainless Steel in Fe(III)/Fe(II)-Buffered Acidic Chloride Solutions
Open Access
- 21 April 2026
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 173 (9)
Abstract
The critical crevice temperature (CCT) of 2205 duplex stainless steel was evaluated in acidic chloride solutions representative of hydrometallurgical leach liquors (50 g·L⁻¹ H₂SO₄, 0–15 g·L⁻¹ Cl⁻) containing the Fe(III)/Fe(II) redox couple at ratios of 1:10, 1:1, and 1000:1. Conventional electrochemical CCT methods are unreliable in redox-buffered environments. Under potentiostatic control, bulk Fe(II) oxidation dominated the measured current, obscuring the crevice corrosion response. open-circuit potential (OCP) ramping overestimated CCT by up to 45 °C relative to immersion testing. This discrepancy arises from temperature-dependent acceleration of Fe(III)/Fe(II) redox kinetics, which increases exchange current density and reduces mixed-potential sensitivity to localized attack. Immersion testing was therefore required to obtain physically meaningful CCT values. Within 1–10 g·L⁻¹ total Fe, CCT was insensitive to iron concentration at constant Fe(III)/Fe(II) ratio and chloride concentration, indicating that redox buffering—not total oxidant concentration—controls crevice stability. Increasing chloride decreased CCT from 98.7 °C to 39.9 °C, while Fe(III)/Fe(II) further reduced CCT by 10–20 °C. At 15 g·L⁻¹ Cl⁻ and a 1000:1 ratio, crevice corrosion initiated at room temperature. These results show that redox buffering and chloride synergistically destabilize passive films in confined geometries and that electrochemical techniques may misrepresent localized corrosion resistance in hydrometallurgical environments.Keywords
Funding Information
- Canadian Network for Research and Innovation in Machining Technology, Natural Sciences and Engineering Research Council of Canada (RGPIN-2023-04545)
This publication has 63 references indexed in Scilit:
- Effect of electrochemical potential on pitting and stress corrosion cracking of super duplex stainless steelJournal of Materials Science, 2026
- A review of passivity breakdown on metal surfaces: influence of chloride- and sulfide-ion concentrations, temperature, and pHEmergent Materials, 2021
- Effect of temperature, chloride ion and pH on the crevice corrosion behavior of SAF 2205 duplex stainless steel in chloride solutionsJournal of Materials Science, 2011
- Explanation of the effect of high chloride concentration on the critical pitting temperature of stainless steelCorrosion Science, 2007
- Pitting and crevice corrosion of superaustenitic stainless steelsMaterials and Corrosion, 2004
- Control of the redox potential by oxygen limitation improves bacterial leaching of chalcopyriteBiotechnology and Bioengineering, 2002
- An alternative method to determine critical pitting temperature of stainless steels in ferric chloride solutionCorrosion Science, 1994
- Effect of suspension potential on the oxidation rate of copper concentrate in a sulfuric acid solutionMetallurgical Transactions B, 1985
- The dissolution of chalcopyrite in ferric sulfate and ferric chloride mediaMetallurgical Transactions B, 1981
- The enrichment of hydrogen and chloride ions in the crevice corrosion of steelsCorrosion Science, 1981