From IGBT to GaN implementation in phase-shifted full-bridge converter
Open Access
- 12 June 2025
- journal article
- research article
- Published by Springer Nature in Electrical Engineering
- Vol. 107 (9) , 11831-11845
Abstract
The phase-shifted full-bridge (PSFB) converter is a preferred topology for isolated DC-DC converters with medium to high power levels. It can be utilized in a variety of applications, preferably with a wide input and/or output range. The efficiency of the converter, as well as its power density, is important factors for modern applications in the automotive industry or renewable energy sources. New semiconductor components based on gallium-nitride (GaN), silicon-carbide, or older silicon MOSFETs, specially designed for resonant converters, together with suitable converter modifications, enable an increase in efficiency and switching frequency. Various auxiliary networks and snubbers extended the limited zero-voltage switching (ZVS) in the lagging leg of the converter. GaN FET enables the utilization of small output capacitances in the PSFB converter to achieve ZVS at low loads even without auxiliary circuits. The small R DS(on) enables the decrease of the conduction losses caused by the circulating current. The FB converter with a controlled rectifier and secondary side energy recovery snubber and the PSFB converter with a synchronous rectifier are compared by simulation for different operational conditions. Finally, a measurement is performed on a PSFB converter with a synchronous rectifier at reduced output power, using a different output rectifier as mentioned in the theoretical part. The experimental part highlights the partial or full achievement of ZVS at different load currents.Keywords
Funding Information
- Scientific Grant Agency of the Ministry of Education of the Slovak Republic (VEGA 1/0584/24, VEGA 1/0584/24)
- Slovak Research and Development Agency (APVV-23-0521, APVV-23-0521)
- Recovery and Resilience Plan for Slovakia (No. 09I05-03-V02-00018)
- Technical University of Kosice
This publication has 15 references indexed in Scilit:
- Method for estimation of power losses and thermal distribution in power convertersElectrical Engineering, 2021
- Zero-Voltage and Zero-Current Switching PWM DC–DC Converter Using Controlled Secondary Rectifier With One Active Switch and Nondissipative Turn-Off SnubberIEEE Transactions on Power Electronics, 2017
- A Novel Soft-Switching Full-Bridge Converter With a Combination of a Secondary Switch and a Nondissipative SnubberIEEE Transactions on Power Electronics, 2017
- Analysis and Design of a Hybrid-Type Converter for Optimal Conversion Efficiency in Electric Vehicle ChargersIEEE Transactions on Industrial Electronics, 2016
- Analysis of GaN HEMT-based phase shifted full bridge dc-dc converter2016
- A new ZVS full-bridge DC-DC converter for battery charging with reduced losses over full-load range2015
- Switching losses in a 1.7 kW GaN based full-bridge DC-DC converter with synchronous rectification2015
- Zero voltage and zero current switching full bridge PWM converter using secondary active clamp2002
- Novel zero-voltage and zero-current-switching full-bridge PWM converter using a simple auxiliary circuitIEEE Transactions on Industry Applications, 1999
- A 1 kW 500 kHz front-end converter for a distributed power supply systemIEEE Transactions on Power Electronics, 1991