Production and characterization of CuNiZnFe2O4 dispersed transformer and kerosene oil based magnetic nanofluids for heat transfer applications
Authors:
- Muhammad IrfanMIMuhammad Irfan
- Noor Ul AinNANoor Ul Ain
- Hammad HussainHHHammad Hussain
- Muhammad Yasin NazMNMuhammad Yasin Naz
- Shazia ShukrullahSSShazia Shukrullah
- Muhammad Adnan MunirMMMuhammad Adnan Munir
- Salim Nasar Faraj MursalSMSalim Nasar Faraj Mursal
- Saifur RahmanSRSaifur Rahman
- Muawia Abdelkafi Magzoub Mohamed AliMAMuawia Abdelkafi Magzoub Mohamed Ali
Open Access
- 1 January 2024
- journal article
- research article
- Published by AIP Publishing in AIP Advances
- Vol. 14 (1)
Abstract
This study produced nanofluids via a two-step method by dispersing copper–nickel–zinc (CuNiZnFe2O4) ferrite nanocomposites in transformer and kerosene oils. A sol–gel auto-combustion approach was adopted to synthesize ferrite nanoparticles. The prepared nanoparticles were analyzed through scanning electron microscopy, photoluminescence spectroscopy, and x-ray diffraction. The measured crystallite size varied between 11 and 13 nm. The SEM images show that the structures of the developed CuNiZn nanoparticles are irregular. The photoluminescence results give a bandgap of 1.91 eV and the emission lines of the nanoparticles. Transient hot wire analysis was performed to determine the thermal conductivity of the base fluid and the prepared nanofluids. It is observed that nanoparticles in the nanofluid enhance the heat transfer rate. It has been proven that CuNiZn/kerosene-based nanofluids have greater thermal conductivity than CuNiZn/transformer oil-based nanofluids. The viscosity of transformer oil-based nanofluids at room temperature is 12.53 mm2 s−1, which decreases to 12.49 mm2 s−1 at 40 °C. Similarly, the viscosity of kerosene-based nanofluids is 1.49 mm2 s−1 at room temperature and 1.16 mm2 s−1 at 40 °C. The sedimentation method revealed that CuNiZn/transformer oil-based nanofluids have greater stability than CuNiZn/kerosene-based nanofluids.Keywords
Funding Information
- Najran University (NU/NRP/SERC/12/15)
This publication has 29 references indexed in Scilit:
- Preparation and properties of copper-oil-based nanofluidsDiscover Nano, 2011
- Experimental investigation for enhanced ferrofluid heat transfer under magnetic field effectJournal of Magnetism and Magnetic Materials, 2010
- Attractive and Repulsive Electrostatic Forces between Positively Charged Latex Particles in the Presence of Anionic Linear PolyelectrolytesThe Journal of Physical Chemistry B, 2010
- Experimental and numerical investigation of natural convection of magnetic fluids in a cubic cavityJournal of Magnetism and Magnetic Materials, 2009
- Production and dispersion stability of nanoparticles in nanofluidsPowder Technology, 2008
- Magnetoconvective heat transfer from a cylinder under the influence of a nonuniform magnetic fieldJournal of Physics: Condensed Matter, 2008
- Stability and thermal conductivity characteristics of nanofluidsThermochimica Acta, 2007
- An application of a binary mixture of magnetic fluid for heat transport devicesJournal of Magnetism and Magnetic Materials, 2005
- A tunable optical filterMeasurement Science and Technology, 2003
- Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion methodJournal of Magnetism and Magnetic Materials, 2000