Role of Li addition in governing solidification-induced microstructural evolution and electrochemical degradation of as-cast Mg-3Zn-3Sn alloys
Authors:
- Shabnam HamedzadehSHShabnam Hamedzadeh
- Marali YousefpourMYMarali Yousefpour
- Ehsan BorhaniEBEhsan Borhani
- Morteza DaliriMDMorteza Daliri
Preprint
- 24 June 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The solidification of biodegradable magnesium (Mg) alloys significantly influences their strength and degradation over time. This study examined the effect of adding lithium (0–5 wt.%) to affects the microstructure and corrosion of as-cast Mg-3Zn-3Sn alloys. Unlike previous studies on thermomechanical processing, we focused on the unique role of lithium (Li) during the initial crystallization, where it acts as a grain refiner and modulator of the phase distribution. SEM-EDS and Rietveld-refined XRD showed that Li specifically transformed the microstructure from coarse dendrites to finer, more uniform grains. At 4 wt.% Li, secondary phases are better distributed, and grain-to-grain connections are stronger. The Mg-3Zn-3Sn-4Li (ZTL334) alloy achieved a compressive strength of 385 MPa and ductility of 26% in its as-cast state. Electrochemical tests in Dulbecco’s Modified Eagle Medium (DMEM) showed that 4 wt. % Li makes the degradation pattern more even, which lowers the corrosion current density to 199 μA/cm2 and reduces micro-galvanic effects at grain boundaries. These results show that adding Li can change the microstructure of solidification, which is a step toward producing high-performance biodegradable implants without any extra work.Keywords
This publication has 55 references indexed in Scilit:
- Effect of zinc clustering, micro-texture, and surface oxide constituents on the electrochemical corrosion of Sn-Zn coatings electrodeposited at different current densitiesJournal of Materials Science, 2024
- Evaluation of the Wear Performance of Novel Titanium/Hydroxyapatite-Reinforced Mg–3Zn Hybrid Composites Fabricated by Squeeze CastingJournal of Bio- and Tribo-Corrosion, 2023
- Dry Sliding Wear Mechanisms of Incorporated Hydroxyapatite Waste Materials: Synthesis and Characterization of Magnesium Hybrid CompositesTransactions of the Indian Institute of Metals, 2020
- Corrosion-wear behavior of a biocompatible magnesium matrix composite in simulated body fluidFriction, 2020
- The current trends of Mg alloys in biomedical applications—A reviewJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2018
- Effects of Li addition on the corrosion behaviour and biocompatibility of Mg(Li)–Zn–Ca metallic glassesJournal of Materials Science, 2018
- Mechanical properties, corrosion, and biocompatibility of Mg‐Zr‐Sr‐Dy alloys for biodegradable implant applicationsJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2017
- Corrosion and wear behavior of an Mg–2Zn–0.2Mn alloy in simulated body fluidRare Metals, 2013
- Mechanism of seizure of aluminium-silicon alloys dry sliding against steelWear, 1995
- Effect of magnesium addition and heat treatment on mild wear of hypoeutectic aluminium-silicon alloysActa Metallurgica et Materialia, 1991