Antenna Design and Analysis Using the Sequential Loading Method
- 10 September 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 68 (11) , 7239-7244
Abstract
This paper presents a new method of accurately designing and analyzing an antenna or array. The proposed technique operates solely on the transfer admittance matrix of a perfect electrically conducting antenna fabric that is obtained using a full-wave simulator only once. The desired antenna, which must be a subset of the fabric, is then synthesized by progressively loading the fabric and applying a computationally efficient iterative post-processing technique that transforms the stored admittance matrix into one that corresponds to the desired antenna or array. Given that the admittance matrix of the fabric is used as the basis for all subsequent antennas that can be represented by the fabric, it contains the solutions to an entire class of antennas. The proposed method is demonstrated by applying it to the class of co-linear antennas up to five wavelengths long, arranged along a single axis. The method is validated by comparing its results to those obtained using a conventional full-wave simulator. The proposed method is applied first to the case of multiple loads located at arbitrary port locations along the fabric. Then, open-circuited loads are used to decimate the tips of a linear antenna to demonstrate that the method accurately predicts the response of an electrically shorter antenna. Finally, decimation is used to transform the fabric into an array of smaller antennas, where it is shown that mutual coupling effects are accurately predicted.Keywords
Funding Information
- Directorate of Technical Airworthiness and Engineering Support, Department of National Defence, Canada
This publication has 11 references indexed in Scilit:
- An Improved Antenna Scattering Model: An equivalent model based on the reciprocity theoremIEEE Antennas and Propagation Magazine, 2019
- Compensation of Cross Coupling in Multiple-Receiver Wireless Power Transfer SystemsIEEE Transactions on Industrial Informatics, 2016
- Application of Electrically Invisible Antennas to the Modulated Scatterer TechniqueIEEE Transactions on Instrumentation and Measurement, 2015
- Radar cross-section reduction for a microstrip patch antenna using PIN diodesIET Microwaves, Antennas & Propagation, 2012
- MAM—A Multipurpose Admittance Matrix for Antenna Design Via the Finite Element MethodIEEE Transactions on Antennas and Propagation, 2007
- Dual-Band Reconfigurable Antenna With a Very Wide Tunability RangeIEEE Transactions on Antennas and Propagation, 2006
- Field Computation by Moment Methods1993
- Straight wires with arbitrary excitation and loadingIEEE Transactions on Antennas and Propagation, 1967
- The minimization of the back scattering of a cylinder by central loadingIEEE Transactions on Antennas and Propagation, 1964
- New techniques for modifying monostatic and multistatic radar cross sectionsIEEE Transactions on Antennas and Propagation, 1963