Effect of Fluorinated Graphite (FG) Addition on Friction Performance of FG-Ni/WC/CeO2 Cladding Layers over a Wide Temperature Range
Open Access
Abstract
This study fabricated fluorinated graphite (FG)-reinforced Ni/WC/CeO2 cladding layers on 45 steel substrates using vacuum cladding technology. Their microstructure, phase composition, mechanical properties, and tribological behavior over a wide temperature range (25–800 °C) were systematically characterized. The results demonstrate that FG addition promotes the formation of a self-lubricating CeF3 phase. The optimal CeF3 phase formation efficiency occurred at a 1.5 wt% FG content (NWF15). The NWF15 cladding layer exhibited the smallest average grain size (15.88 nm) and the lowest porosity (0.1410%) among all samples. Mechanical testing revealed that this cladding layer possessed the highest microhardness (1062.7 ± 21.9 HV0.2). Its H/E and H3/E2 ratios, indicative of resistance to elastic strain and plastic deformation, reached 0.0489 and 0.0291, respectively. Tribological tests revealed pronounced temperature-dependent wear behavior: abrasive wear was predominant at 25 °C; adhesive wear dominated from 200 to 600 °C; and oxidative wear became the primary mechanism at 800 °C. Throughout this temperature range, the CeF3 phase effectively reduced wear damage by suppressing groove propagation and providing effective lubrication, particularly under high-temperature conditions.Keywords
Funding Information
- The National Natural Science Foundation of China (51765035, 51205178, ARES-2022-02, No.22ZD6GA008)
- the Open Fund of Key Laboratory of Advanced Reactor Engineering and Safety, Ministry of Education (51765035, 51205178, ARES-2022-02, No.22ZD6GA008)
- The Major Science and Technology Project of Gansu Province (51765035, 51205178, ARES-2022-02, No.22ZD6GA008)
This publication has 51 references indexed in Scilit:
- Effect of nanoscale CeO2 powder on wear and corrosion resistance of Ni60A-WC coatingsCeramics International, 2025
- Flatland of Graphene's derivatives: Classification, synthesis, mechanisms, role of defects, applications, and prospectivesCoordination Chemistry Reviews, 2025
- Enhanced wear resistance and fracture resistance of spherical WC reinforced nickel-based alloy coating by adding non-spherical WCInternational Journal of Refractory Metals and Hard Materials, 2024
- Preparation and investigation of Ni-W/CeO2 composite coating and its structure and anti-corrosion properties with different ceria content and deposition timeCeramics International, 2024
- Functionally graded carbon nanotubes reinforced composite structures: An extensive reviewComposite Structures, 2022
- Rich activated edges of hexagonal boron nitride flakes in-situ triggered by nickel nanoparticles to achieve efficient reduction of friction and wearComposites Part B: Engineering, 2022
- Mechanical and high-temperature tribological properties of CrAlN/TiSiN multilayer coating deposited by PVDCeramics International, 2021
- Laser Cladding Novel NiCrSiFeBW–CeO2 Coating with Both High Wear and Corrosion ResistanceMetals and Materials International, 2020
- Friction–Wear Characteristics of High Velocity Oxygen Fuel Sprayed NiCrBSi Alloy Coating at Elevated TemperaturesTransactions of the Indian Institute of Metals, 2018
- Influence of service temperature on tribological characteristics of self-lubricant coatings: A reviewFrontiers of Materials Science, 2013