A Wireless Power Transfer System With High Misalignment Tolerance Based on Dual Side Variable Inductor Control
Author:
Open Access
- 17 September 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 134937-134947
Abstract
This article presents an LCC-LCC wireless power transfer (WPT) system based on dual side variable inductor (VI) control to achieve high efficiency and output power regulation. By adjusting the inductances of the VIs, the output voltage and current can be controlled while the wide range of zero voltage switching (ZVS) can be achieved for the primary side inverter under different misalignment conditions. The VIs in the primary and secondary sides provides ZVS condition and output regulation against misalignment, respectively. Since the resonant inductors of LCC-LCC topology are designed as VIs, the use of additional compensation elements is also eliminated. Moreover, the wireless communication is not necessary between primary and secondary side. A 300 W prototype is developed to verify the effectiveness of the proposed control method. Experimental results demonstrate that good regulation performance and high transmission efficiency are provided for the WPT system under the wide range of misalignment. A maximum efficiency of 92.5 % has been achieved for the proposed WPT system under the full power output.Keywords
Funding Information
- Scientific and Technology Research Council of Türkiye (7238065)
This publication has 32 references indexed in Scilit:
- Variable Inductor Control for Misalignment Tolerance and Constant Current/Voltage Charging in Inductive Power Transfer SystemIEEE Journal of Emerging and Selected Topics in Power Electronics, 2023
- A 6.78-MHz Burst-Mode Controlled Inductive Wireless Power Transfer System for Biomedical Implants With Back-Channel Communication Eliminated Using Transmitter Q-Factor DetectionIEEE Journal of Emerging and Selected Topics in Power Electronics, 2022
- A Double-Side Self-Tuning LCC/S System Using a Variable Switched Capacitor Based on Parameter RecognitionIEEE Transactions on Industrial Electronics, 2020
- Constant Current Charging and Maximum System Efficiency Tracking for Wireless Charging Systems Employing Dual-Side ControlIEEE Transactions on Industry Applications, 2019
- Modular On-Road AGV Wireless Charging Systems Via Interoperable Power AdjustmentIEEE Transactions on Industrial Electronics, 2018
- Design Guidelines to Avoid Bifurcation in a Series–Series Compensated Inductive Power Transfer SystemIEEE Transactions on Industrial Electronics, 2018
- SPICE Modeling of Variable Inductors and Its Application to Single Inductor LED Driver DesignIEEE Transactions on Industrial Electronics, 2016
- Wireless Power Transfer for Electric Vehicle ApplicationsIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- Practical Design Considerations for Contactless Power Transfer Quadrature Pick-UpsIEEE Transactions on Industrial Electronics, 2011
- A Bidirectional Inductive Power Interface for Electric Vehicles in V2G SystemsIEEE Transactions on Industrial Electronics, 2011