AC Ground Fault Location Method for Variable Speed Drives Using Lissajous Curves
- 21 August 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (6) , 8912-8922
Abstract
The increasing presence of electric drives demands the development of new detection and diagnosis methods of electrical faults. In particular, ground faults are the most common type of faults in electrical systems. Locating these faults is not trivial, as they depend not only on the position, but also on its fault resistance. This paper proposes a new method to detect and locate ground faults in the AC side of an electric drive. The method is based on the ground connection of a high value resistance between the midpoint of the DC bus and ground. By means of the study of the relations between the DC voltage on this resistance and the phase-to-neutral voltages in the AC side of the drive, the location of the fault can be determined. This method has several advantages, as it does not require to know the phase impedance or to estimate an initial ground resistance. The method has been validated by means of computer simulations and in an experimental test bench using a 140-kW power converter obtaining satisfactory results.Keywords
Funding Information
- Universidad del País Vasco/Euskal Herriko Unibertsitatea (Basque Goverment, OT1522-22)
This publication has 27 references indexed in Scilit:
- A novel AC line distance protection scheme for AC/DC hybrid system based on fault component energy equationInternational Journal of Electrical Power & Energy Systems, 2022
- Stochastic analysis of future scenarios for battery electric vehicle deployment and the upgrade of the electricity generation system in SpainJournal of Cleaner Production, 2021
- Fault Location in Solar FarmsIEEE Systems Journal, 2020
- A Novel Ground Fault Detection Method for Electric Vehicle Powertrains Based on a Grounding Resistor Voltage AnalysisIEEE Transactions on Industry Applications, 2020
- Faulted Phase Location Identification for Adjustable Speed Drives in High-Resistance Grounding SystemIEEE Transactions on Industry Applications, 2018
- Type B Ground-Fault Protection on Adjustable Frequency DrivesIEEE Transactions on Industry Applications, 2017
- Fault location and detection techniques in power distribution systems with distributed generation: A reviewRenewable and Sustainable Energy Reviews, 2017
- Ground Fault Location Using the Low-Voltage-Side Recorded Data in Distribution SystemsIEEE Transactions on Industry Applications, 2015
- Ground Fault Location Testing of a Noise-Pattern-Based Approach on an Ungrounded DC SystemIEEE Transactions on Industry Applications, 2010
- Fault detection and fault-tolerant control of interior permanent-magnet motor drive system for electric vehicleIEEE Transactions on Industry Applications, 2005