Patxi Madina
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Patxi Madina has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Javier Poza
Faculty of Engineering, Mondragon Unibertsitatea, 20500 Arrasate-Mondragón, Spain
8 shared publications - Fernando Garramiola
Mondragon Unibertsitatea
6 shared publications - Gaizka Almandoz
Faculty of Engineering, Mondragon Unibertsitatea, 20500 Arrasate-Mondragón, Spain
6 shared publications - Jon del Olmo
Faculty of Engineering, Mondragon Unibertsitatea, 20500 Arrasate-Mondragón, Spain
6 shared publications - Aritz Egea
Faculty of Engineering, Mondragon Unibertsitatea, 20500 Arrasate-Mondragón, Spain
2 shared publications - David Gonzalez-Jimenez
Faculty of Engineering, Mondragon Unibertsitatea, 20500 Arrasate-Mondragón, Gipuzkoa, Spain
2 shared publications
Latest Publications
- Open Access
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10932
Adoption of Multiphase and Variable Flux Motors in Automotive Applications
This paper investigates the incorporation of multiphase (MP) and variable flux (VF) permanent magnet motors to electric vehicles (EVs). A literature review is carried out first, which covers the characteristics, benefits and challenges of both motor configurations. MP motors, with their increased phase number, offer enhanced fault tolerance, reduced torque ripple, and improved efficiency, among other benefits. VF technology allows for dynamic adjustment of the magnetic field, optimising motor performance across various operating conditions. By integrating these technologies, this study aims to harness the benefits of both MP configurations and VF capabilities. For this reason, the Finite Element Method (FEM) is used with three-phase, MP, VF, and VF-MP motors. The main contribution is that both technologies have been implemented in a single motor to evaluate and quantify their impact together, obtaining higher torque and constant power values, lower torque ripples, and higher efficiencies in the whole working range.
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10932
Open AccessAdoption of Multiphase and Variable Flux Motors in Automotive Applications
This paper investigates the incorporation of multiphase (MP) and variable flux (VF) permanent magnet motors to electric vehicles (EVs). A literature review is carried out first, which covers the characteristics, benefits and challenges of both motor configurations. MP motors, with their increased phase number, offer enhanced fault tolerance, reduced torque ripple, and improved efficiency, among other benefits. VF technology allows for dynamic adjustment of the magnetic field, optimising motor performance across various operating conditions. By integrating these technologies, this study aims to harness the benefits of both MP configurations and VF capabilities. For this reason, the Finite Element Method (FEM) is used with three-phase, MP, VF, and VF-MP motors. The main contribution is that both technologies have been implemented in a single motor to evaluate and quantify their impact together, obtaining higher torque and constant power values, lower torque ripples, and higher efficiencies in the whole working range.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (6) , 8912-8922
AC Ground Fault Location Method for Variable Speed Drives Using Lissajous Curves
The increasing presence of electric drives demands the development of new detection and diagnosis methods of electrical faults. In particular, ground faults are the most common type of faults in electrical systems. Locating these faults is not trivial, as they depend not only on the position, but also on its fault resistance. This paper proposes a new method to detect and locate ground faults in the AC side of an electric drive. The method is based on the ground connection of a high value resistance between the midpoint of the DC bus and ground. By means of the study of the relations between the DC voltage on this resistance and the phase-to-neutral voltages in the AC side of the drive, the location of the fault can be determined. This method has several advantages, as it does not require to know the phase impedance or to estimate an initial ground resistance. The method has been validated by means of computer simulations and in an experimental test bench using a 140-kW power converter obtaining satisfactory results.
- 21 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 60 (6) , 8912-8922
AC Ground Fault Location Method for Variable Speed Drives Using Lissajous Curves
The increasing presence of electric drives demands the development of new detection and diagnosis methods of electrical faults. In particular, ground faults are the most common type of faults in electrical systems. Locating these faults is not trivial, as they depend not only on the position, but also on its fault resistance. This paper proposes a new method to detect and locate ground faults in the AC side of an electric drive. The method is based on the ground connection of a high value resistance between the midpoint of the DC bus and ground. By means of the study of the relations between the DC voltage on this resistance and the phase-to-neutral voltages in the AC side of the drive, the location of the fault can be determined. This method has several advantages, as it does not require to know the phase impedance or to estimate an initial ground resistance. The method has been validated by means of computer simulations and in an experimental test bench using a 140-kW power converter obtaining satisfactory results.
- Open Access
Data-Driven Low-Frequency Oscillation Event Detection Strategy for Railway Electrification Networks
Low-frequency oscillations (LFO) occur in railway electrification systems due to the incorporation of new trains with switching converters. As a result, the increased harmonic content can cause catenary stability problems under certain conditions. Most of the research published on this topic to date is focused on modelling the event and analysing it using frequency spectrums. However, in recent years, due to the new technologies linked to Big Data (BD) and data mining (DM), a new opportunity to study and detect LFO events by means of machine-learning (ML) methods has emerged. Trains continuously collect data from the most important catenary variables, which offers new resources for analysing this type of event. Therefore, this article presents the design and implementation of a data-driven LFO event detection strategy for AC railway network scenarios. Compared to previous investigations, a new approach to analyse and detect LFO events, based on field data and ML, is presented. To obtain the most appropriate detection approach for the context of this application, on the one hand, this investigation includes a comparison of machine-learning algorithms (support vector machine, logistic regression, random forest, k-nearest neighbours, naïve Bayes) which have been trained with real field data. On the other hand, an analysis of key parameters and features to optimize event detection is also included. Thus, the most significant result of this work is the high metric values of the solution, reaching values above 97% in accuracy and 93% in F-1 score with the random forest algorithm. In addition, the applicability and training of data-driven methods with real field data are demonstrated. This automatic detection strategy can help with speeding up and improving LFO detection tasks that used to be performed manually. Finally, it is worth mentioning that this research has been structured based on the CRISP-DM methodology, established as the de facto approach for industrial DM projects.
Open AccessData-Driven Low-Frequency Oscillation Event Detection Strategy for Railway Electrification Networks
Low-frequency oscillations (LFO) occur in railway electrification systems due to the incorporation of new trains with switching converters. As a result, the increased harmonic content can cause catenary stability problems under certain conditions. Most of the research published on this topic to date is focused on modelling the event and analysing it using frequency spectrums. However, in recent years, due to the new technologies linked to Big Data (BD) and data mining (DM), a new opportunity to study and detect LFO events by means of machine-learning (ML) methods has emerged. Trains continuously collect data from the most important catenary variables, which offers new resources for analysing this type of event. Therefore, this article presents the design and implementation of a data-driven LFO event detection strategy for AC railway network scenarios. Compared to previous investigations, a new approach to analyse and detect LFO events, based on field data and ML, is presented. To obtain the most appropriate detection approach for the context of this application, on the one hand, this investigation includes a comparison of machine-learning algorithms (support vector machine, logistic regression, random forest, k-nearest neighbours, naïve Bayes) which have been trained with real field data. On the other hand, an analysis of key parameters and features to optimize event detection is also included. Thus, the most significant result of this work is the high metric values of the solution, reaching values above 97% in accuracy and 93% in F-1 score with the random forest algorithm. In addition, the applicability and training of data-driven methods with real field data are demonstrated. This automatic detection strategy can help with speeding up and improving LFO detection tasks that used to be performed manually. Finally, it is worth mentioning that this research has been structured based on the CRISP-DM methodology, established as the de facto approach for industrial DM projects.
- Top Cited PapersOpen Access
Data-Driven Fault Diagnosis for Electric Drives: A Review
The need to manufacture more competitive equipment, together with the emergence of the digital technologies from the so-called Industry 4.0, have changed many paradigms of the industrial sector. Presently, the trend has shifted to massively acquire operational data, which can be processed to extract really valuable information with the help of Machine Learning or Deep Learning techniques. As a result, classical Condition Monitoring methodologies, such as model- and signal-based ones are being overcome by data-driven approaches. Therefore, the current paper provides a review of these data-driven active supervision strategies implemented in electric drives for fault detection and diagnosis (FDD). Hence, first, an overview of the main FDD methods is presented. Then, some basic guidelines to implement the Machine Learning workflow on which most data-driven strategies are based, are explained. In addition, finally, the review of scientific articles related to the topic is provided, together with a discussion which tries to identify the main research gaps and opportunities.
Top Cited PapersOpen AccessData-Driven Fault Diagnosis for Electric Drives: A Review
The need to manufacture more competitive equipment, together with the emergence of the digital technologies from the so-called Industry 4.0, have changed many paradigms of the industrial sector. Presently, the trend has shifted to massively acquire operational data, which can be processed to extract really valuable information with the help of Machine Learning or Deep Learning techniques. As a result, classical Condition Monitoring methodologies, such as model- and signal-based ones are being overcome by data-driven approaches. Therefore, the current paper provides a review of these data-driven active supervision strategies implemented in electric drives for fault detection and diagnosis (FDD). Hence, first, an overview of the main FDD methods is presented. Then, some basic guidelines to implement the Machine Learning workflow on which most data-driven strategies are based, are explained. In addition, finally, the review of scientific articles related to the topic is provided, together with a discussion which tries to identify the main research gaps and opportunities.
- Open Access
Multi-Physics Tool for Electrical Machine Sizing
Society is turning to electrification to reduce air pollution, increasing electric machine demand. For industrial mass production, a detailed design of one machine is usually done first, then a design of similar machines, but different ratings are reached by geometry scaling. This design process may be highly time-consuming, so, in this paper, a new sizing method is proposed to reduce this time, maintaining accuracy. It is based on magnetic flux and thermal maps, both linked with an algorithm so that the sizing process of an electrical machine can be carried out in less than one minute. The magnetic flux maps are obtained by Finite Element Analysis (FEA) and the thermal maps are obtained by analytical models based on Lumped Parameter Circuits (LPC), applying a time-efficient procedure. The proposed methodology is validated in a real case study, sizing 10 different industrial machines. Then, the accuracy of the sizing tool is validated performing the experimental test over the 10 machines. A very good agreement is achieved between the experimental results and the performances calculated by the sizing tools, as the maximum error is around 5%.
Open AccessMulti-Physics Tool for Electrical Machine Sizing
Society is turning to electrification to reduce air pollution, increasing electric machine demand. For industrial mass production, a detailed design of one machine is usually done first, then a design of similar machines, but different ratings are reached by geometry scaling. This design process may be highly time-consuming, so, in this paper, a new sizing method is proposed to reduce this time, maintaining accuracy. It is based on magnetic flux and thermal maps, both linked with an algorithm so that the sizing process of an electrical machine can be carried out in less than one minute. The magnetic flux maps are obtained by Finite Element Analysis (FEA) and the thermal maps are obtained by analytical models based on Lumped Parameter Circuits (LPC), applying a time-efficient procedure. The proposed methodology is validated in a real case study, sizing 10 different industrial machines. Then, the accuracy of the sizing tool is validated performing the experimental test over the 10 machines. A very good agreement is achieved between the experimental results and the performances calculated by the sizing tools, as the maximum error is around 5%.
- Open Access
A Hybrid Sensor Fault Diagnosis for Maintenance in Railway Traction Drives
Due to the importance of sensors in railway traction drives availability, sensor fault diagnosis has become a key point in order to move from preventive maintenance to condition-based maintenance. Most research works are limited to sensor fault detection and isolation, but only a few of them analyze the types of sensor faults, such as offset or gain, with the aim of reconfiguring the sensor in order to implement a fault tolerant system. This article is based on a fusion of model-based and data-driven techniques. First, an observer-based approach, using a Sliding Mode observer, is utilized for sensor fault reconstruction in real time. Then, once the fault is detected, a time window of sensor measurements and sensor fault reconstruction is sent to the remote maintenance center for fault evaluation. Finally, an offline processing is carried out to discriminate between gain and offset sensor faults, in order to get a maintenance decision-making to reconfigure the sensor during the next train stop. Fault classification is done by means of histograms and statistics. The technique here proposed is applied to the DC-link voltage sensor in a railway traction drive and is validated in a hardware-in-the-loop platform.
Open AccessA Hybrid Sensor Fault Diagnosis for Maintenance in Railway Traction Drives
Due to the importance of sensors in railway traction drives availability, sensor fault diagnosis has become a key point in order to move from preventive maintenance to condition-based maintenance. Most research works are limited to sensor fault detection and isolation, but only a few of them analyze the types of sensor faults, such as offset or gain, with the aim of reconfiguring the sensor in order to implement a fault tolerant system. This article is based on a fusion of model-based and data-driven techniques. First, an observer-based approach, using a Sliding Mode observer, is utilized for sensor fault reconstruction in real time. Then, once the fault is detected, a time window of sensor measurements and sensor fault reconstruction is sent to the remote maintenance center for fault evaluation. Finally, an offline processing is carried out to discriminate between gain and offset sensor faults, in order to get a maintenance decision-making to reconfigure the sensor during the next train stop. Fault classification is done by means of histograms and statistics. The technique here proposed is applied to the DC-link voltage sensor in a railway traction drive and is validated in a hardware-in-the-loop platform.
- Open Access
- 3 December 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2475
A Review in Fault Diagnosis and Health Assessment for Railway Traction Drives
During the last decade, due to the increasing importance of reliability and availability, railway industry is making greater use of fault diagnosis approaches for early fault detection, as well as Condition-based maintenance frameworks. Due to the influence of traction drive in the railway system availability, several research works have been focused on Fault Diagnosis for Railway traction drives. Fault diagnosis approaches have been applied to electric machines, sensors and power electronics. Furthermore, Condition-based maintenance framework seems to reduce corrective and Time-based maintenance works in Railway Systems. However, there is not any publication that summarizes all the research works carried out in Fault diagnosis and Condition-based Maintenance frameworks for Railway Traction Drives. Thus, this review presents the development of Health Assessment and Fault Diagnosis in Railway Traction Drives during the last decade.
- 3 December 2018
- Published by MDPI AG in Applied Sciences
- Vol. 8 (12) , 2475
Open AccessA Review in Fault Diagnosis and Health Assessment for Railway Traction Drives
During the last decade, due to the increasing importance of reliability and availability, railway industry is making greater use of fault diagnosis approaches for early fault detection, as well as Condition-based maintenance frameworks. Due to the influence of traction drive in the railway system availability, several research works have been focused on Fault Diagnosis for Railway traction drives. Fault diagnosis approaches have been applied to electric machines, sensors and power electronics. Furthermore, Condition-based maintenance framework seems to reduce corrective and Time-based maintenance works in Railway Systems. However, there is not any publication that summarizes all the research works carried out in Fault diagnosis and Condition-based Maintenance frameworks for Railway Traction Drives. Thus, this review presents the development of Health Assessment and Fault Diagnosis in Railway Traction Drives during the last decade.
- Open Access
DC-Link Voltage and Catenary Current Sensors Fault Reconstruction for Railway Traction Drives
Due to the importance of sensors in control strategy and safety, early detection of faults in sensors has become a key point to improve the availability of railway traction drives. The presented sensor fault reconstruction is based on sliding mode observers and equivalent injection signals, and it allows detecting defective sensors and isolating faults. Moreover, the severity of faults is provided. The proposed on-board fault reconstruction has been validated in a hardware-in-the-loop platform, composed of a real-time simulator and a commercial traction control unit for a tram. Low computational resources, robustness to measurement noise, and easiness to tune are the main requirements for industrial acceptance. As railway applications are not safety-critical systems, compared to aerospace applications, a fault evaluation procedure is proposed, since there is enough time to perform diagnostic tasks. This procedure analyses the fault reconstruction in the steady state, delaying the decision-making in some seconds, but minimising false detections.
Open AccessDC-Link Voltage and Catenary Current Sensors Fault Reconstruction for Railway Traction Drives
Due to the importance of sensors in control strategy and safety, early detection of faults in sensors has become a key point to improve the availability of railway traction drives. The presented sensor fault reconstruction is based on sliding mode observers and equivalent injection signals, and it allows detecting defective sensors and isolating faults. Moreover, the severity of faults is provided. The proposed on-board fault reconstruction has been validated in a hardware-in-the-loop platform, composed of a real-time simulator and a commercial traction control unit for a tram. Low computational resources, robustness to measurement noise, and easiness to tune are the main requirements for industrial acceptance. As railway applications are not safety-critical systems, compared to aerospace applications, a fault evaluation procedure is proposed, since there is enough time to perform diagnostic tasks. This procedure analyses the fault reconstruction in the steady state, delaying the decision-making in some seconds, but minimising false detections.
- Open Access
Integral Sensor Fault Detection and Isolation for Railway Traction Drive
Due to the increasing importance of reliability and availability of electric traction drives in Railway applications, early detection of faults has become an important key for Railway traction drive manufacturers. Sensor faults are important sources of failures. Among the different fault diagnosis approaches, in this article an integral diagnosis strategy for sensors in traction drives is presented. Such strategy is composed of an observer-based approach for direct current (DC)-link voltage and catenary current sensors, a frequency analysis approach for motor current phase sensors and a hardware redundancy solution for speed sensors. None of them requires any hardware change requirement in the actual traction drive. All the fault detection and isolation approaches have been validated in a Hardware-in-the-loop platform comprising a Real Time Simulator and a commercial Traction Control Unit for a tram. In comparison to safety-critical systems in Aerospace applications, Railway applications do not need instantaneous detection, and the diagnosis is validated in a short time period for reliable decision. Combining the different approaches and existing hardware redundancy, an integral fault diagnosis solution is provided, to detect and isolate faults in all the sensors installed in the traction drive.
Open AccessIntegral Sensor Fault Detection and Isolation for Railway Traction Drive
Due to the increasing importance of reliability and availability of electric traction drives in Railway applications, early detection of faults has become an important key for Railway traction drive manufacturers. Sensor faults are important sources of failures. Among the different fault diagnosis approaches, in this article an integral diagnosis strategy for sensors in traction drives is presented. Such strategy is composed of an observer-based approach for direct current (DC)-link voltage and catenary current sensors, a frequency analysis approach for motor current phase sensors and a hardware redundancy solution for speed sensors. None of them requires any hardware change requirement in the actual traction drive. All the fault detection and isolation approaches have been validated in a Hardware-in-the-loop platform comprising a Real Time Simulator and a commercial Traction Control Unit for a tram. In comparison to safety-critical systems in Aerospace applications, Railway applications do not need instantaneous detection, and the diagnosis is validated in a short time period for reliable decision. Combining the different approaches and existing hardware redundancy, an integral fault diagnosis solution is provided, to detect and isolate faults in all the sensors installed in the traction drive.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 79-84
Analysis of non-uniform circumferential segmentation of magnets to reduce eddy-current losses in SPMSM machines
Eddy current losses generated in the rotor of the permanent magnet machines may lead to an excessive magnet heating. This can cause full demagnetization of the magnets so it is very important to analyze the losses on them to adopt solutions to reduce eddy current losses. The most common technique is the magnet circumferential segmentation. The segmentation of the magnetic poles usually is the same for each magnet segment. In this paper a new concept named nonuniform magnet segmentation is presented, where the length of each segment of a pole is chosen to minimize the losses. This method is tested in three different machines with particular characteristics and the results confirm that fewer losses can be achieved with this segmentation technique.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 79-84
Analysis of non-uniform circumferential segmentation of magnets to reduce eddy-current losses in SPMSM machines
Eddy current losses generated in the rotor of the permanent magnet machines may lead to an excessive magnet heating. This can cause full demagnetization of the magnets so it is very important to analyze the losses on them to adopt solutions to reduce eddy current losses. The most common technique is the magnet circumferential segmentation. The segmentation of the magnetic poles usually is the same for each magnet segment. In this paper a new concept named nonuniform magnet segmentation is presented, where the length of each segment of a pole is chosen to minimize the losses. This method is tested in three different machines with particular characteristics and the results confirm that fewer losses can be achieved with this segmentation technique.