A Study of Isothermal Curing of PMI Using DMA
Authors:
Open Access
- 1 January 2015
- journal article
- research article
- Published by Hindawi Limited in Advances in Materials Science and Engineering
- Vol. 2015, 1-12
Abstract
The isothermal curing of polymethacrylimide (PMI) is studied through the use of dynamic mechanical analysis (DMA). Based on the growth rate of measured dynamic mechanical property, the relative conversion is defined to investigate the evolution of storage modulusat different curing temperatures. Hsich’s nonequilibrium thermodynamic fluctuation theory, Avrami equation, and isoconversional methods are used to analyze isothermal cure kinetics of PMI. The results show that there are different increase modes ofat low temperature range and high temperature range, respectively. In low temperature range, the relative conversion curves include a transitional stage which is found to be strongly frequency-dependent, but this stage is not observed in the relative conversion curve in high temperature range. During the isothermal curing process, the relative evolution ofcan be described by Hsich’s nonequilibrium thermodynamic fluctuation theory and Avrami equation. Moreover, the values and evolutions of activation energy are different in two temperature ranges, which suggest that the curing mechanism probably has changed.
Keywords
Funding Information
- Priority Academic Program Development of Jiangsu Higher Education Institution (35061101)
This publication has 38 references indexed in Scilit:
- Preparation of foamed polymethacrylimide structural materials from cross-linked copolymers of acrylonitrile and methacyrlic acidRussian Journal of Applied Chemistry, 2012
- Dynamic cure kinetics and thermal degradation of brominated epoxy resin–organoclay based nanocompositesThermochimica Acta, 2011
- Use of isoconversional methods to analyze the cure kinetics of isocyanate-ended quasi-prepolymers with waterJournal of Applied Polymer Science, 2007
- Curing of a thermosetting powder coating by means of DMTA, TMA and DSCPolymer, 2003
- Characterization of the cure‐state of DGEBA‐DDS epoxy using ultrasonic, dynamic mechanical, and thermal probesPolymer Engineering & Science, 2002
- Application of isothermal and model‐free isoconversional modes in DSC measurement for the curing process of the PU systemJournal of Applied Polymer Science, 2001
- TTT cure diagram for an epoxy system diglycidyl ether of bisphenol A/1,2 diamine cyclohexane/calcium carbonate fillerPolymer, 2001
- Thermal characterization and comparison of structural prepregs with different cure temperaturesThermochimica Acta, 1997
- A kinetic model for curing reactions of epoxides with aminesPolymer Engineering & Science, 1987
- Analysis of epoxy resin curing kinetics using the Avrami theory of phase changePolymer Engineering & Science, 1987