Real-Time Hybrid Test Validation of a MR Damper Controlled Building with Shake Table Tests
- 1 February 2011
- journal article
- research article
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 14 (1) , 79-92
Abstract
Real-time hybrid testing (RTHTing) is a relatively new form of experimental testing where only the critical components of the system are physically tested while the rest of the structure is simulated. A RTHT can provide a cost-effective means for testing semiactive controlled civil structures. This paper describes the experimental validation of the RTHT facility at the University of Connecticut through comparison of RTHT results with corresponding shake table responses of a Magneto-Rheological (MR) fluid damper controlled test structure. The two-story structure has an MR damper connected between the ground and first story and is excited by ground accelerations. For the shake table tests the fully physical building model and MR damper are tested on a medium-scale shake table. In the RTHT the MR damper alone will be tested physically while the rest of the test structure and ground excitation is simulated in the RTHT control computer. The performance of the RTHT is validated by comparing the building responses and measured damper force with those from the shake table test in both the time and frequency domains.Keywords
This publication has 18 references indexed in Scilit:
- Real‐time hybrid testing using the unconditionally stable explicit CR integration algorithmEarthquake Engineering & Structural Dynamics, 2008
- Real-time dynamic substructuring in a coupled oscillator–pendulum systemProceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2006
- Development and application of large–scale continuous pseudo–dynamic testing techniquesPhilosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2001
- Real-Time Substructure Tests Using Hydraulic ActuatorJournal of Engineering Mechanics, 1999
- Real-time hybrid experimental system with actuator delay compensation and its application to a piping system with energy absorberEarthquake Engineering & Structural Dynamics, 1999
- Effective Force Testing: A Method of Seismic Simulation for Structural TestingJournal of Structural Engineering, 1999
- Development of a Real-Time Hybrid Experimental System Using a Shaking Table. (Proposal of Experiment Concept and Feasibility Study with Rigid Secondary System).JSME International Journal Series C, 1999
- Modeling and control of magnetorheological dampers for seismic response reductionSmart Materials and Structures, 1996
- Second Generation of Active Structural Control in Civil EngineeringComputer-Aided Civil and Infrastructure Engineering, 1996
- Role of Control-Structure Interaction in Protective System DesignJournal of Engineering Mechanics, 1995