Strengthening mechanism of CeO2 on the high-temperature friction and wear performance of laser-cladded AlCoCrFeNi high-entropy alloy
Preprint
- 23 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
AlCoCrFeNi high-entropy alloy coatings reinforced with CeO₂ were fabricated on 316L stainless steel via laser cladding to enhance high-temperature tribological performance. A data-assisted approach combining chemical descriptors with a support vector regression model was used to predict the optimal CeO₂ content based on wear-related indicators. The model identified an optimal content of 2.96 wt%, which was validated by experiments at 600 °C and 800 °C. The results show that CeO₂ addition refines the microstructure, promotes grain boundary pinning, and facilitates the formation of dense Cr₂O₃- and Fe₂O₃-rich tribo-oxide films. The coating with 2.96 wt% CeO₂ exhibits the lowest friction coefficient, with wear-track width reduced by 44.0% and 47.0% and wear depth decreased by 19.0% and 57.9% at 600 °C and 800 °C, respectively, compared with the CeO₂-free coating. The dominant wear mechanism shifts from adhesive wear to mild abrasive wear. Microstructural analysis reveals the formation of a nanocrystalline subsurface layer and the evolution of dislocations from tangles to stable walls, indicating enhanced structural stability. The improved performance is attributed to the synergistic effect of grain refinement and stabilized tribo-oxide films. This study provides a data-guided strategy for optimizing rare-earth-modified HEA coatings for high-temperature applications.Keywords
This publication has 15 references indexed in Scilit:
- Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc meltingJournal of Materials Research and Technology, 2024
- Effects of carbon doping on microstructure, electrochemical and tribo-corrosion performances of biocompatible TiZrNbTaMoC N coatingsCeramics International, 2023
- Effect of CeO2 on the microstructure and properties of AlCoCrFeNi2.1 laser cladding coatingsJournal of Alloys and Compounds, 2023
- Improvement in corrosion resistance of 316L stainless steel in simulated body fluid mixed with antiplatelet drugs by coating with Ti-doped DLC films for application in biomaterialsCorrosion Science, 2022
- Additive manufacturing of high-strength CrMnFeCoNi-based High Entropy Alloys with TiC additionIntermetallics, 2019
- Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser claddingJournal of Alloys and Compounds, 2019
- Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laserMaterials & Design, 2016
- Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energyJournal of Alloys and Compounds, 2014
- Solidification behaviour in laser cladding of AlCoCrCuFeNi high-entropy alloy on magnesium substratesJournal of Alloys and Compounds, 2014
- The quantification of cellular viability and inflammatory response to stainless steel alloysBiomaterials, 2005