Air-Based Deposition of Conductive Nitride Thin Films by Sputtering
Authors:
- 1 January 2011
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 158 (6) , P75-P80
Abstract
Conductive nitride films are conventionally prepared by reactive sputtering using nitrogen as a reactive gas. Replacing nitrogen with air as a reactive gas allows the process to be conducted at high base pressures, i.e., low vacuum, which can reduce substantially the processing time. In this study, TiN films were selected as a model system for the investigation. As the air/Ar flow ratio reached 0.10–0.15, the films revealed the characteristic rock-salt structured TiN. The N/Ti of the films was 0.80–0.83 with 9–13 atom % of oxygen. The determined resistivities and hardnesses of the films were in the range of 110–130 μΩ·cm and 26–27 GPa, respectively. All obtained data fulfill the characteristics of TiN films. Kinetic formation apparently prevails over thermodynamic predictions at low air/Ar ratios. In such plasma, the dissociation energy of nitrogen is much smaller than that of oxygen, leading to the high impingement rate of nitrogen. The dissolution of oxygen in the TiN films seems also to stabilize the nitride structure.Keywords
This publication has 40 references indexed in Scilit:
- Structural and electrical properties of magnetron sputtered Ti(ON) thin films: The case of TiN doped in situ with oxygenJournal of Power Sources, 2009
- Influences of oxygen impurity contained in nitrogen on the reaction of titanium with nitrogenJournal of Materials Research, 2009
- X-ray photoelectron spectroscopy analyses of titanium oxynitride films prepared by magnetron sputtering using air/Ar mixturesThin Solid Films, 2009
- Phase mixture in MOCVD and reactive sputtering TiOxNy thin films revealed and quantified by XPS factorial analysisActa Materialia, 2006
- A quantitative study of the hardness of a superhard nanocrystalline titanium nitride/silicon nitride coatingScripta Materialia, 2005
- Effects of arrival rate and gas pressure on the chemical bonding and composition in titanium nitride films prepared on Si(100) substrates by ion beam and vapor depositionJournal of Vacuum Science & Technology A, 2004
- Nucleation kinetics during homoepitaxial growth of TiN(001) by reactive magnetron sputteringPhysical Review B, 2004
- Degradation of TiN coatings under cyclic loadingActa Materialia, 2004
- TiN coating of tool steels: a reviewJournal of Materials Processing Technology, 1993
- Vacancy effects in the x-ray photoelectron spectra ofPhysical Review B, 1983