Effect of Airflow Non-Uniformities on the Thermal Performance of Water–Air Heat Exchangers—Experimental Study and Analysis
Open Access
Abstract
The thermal performance of fin-and-tube heat exchangers (HX) is a crucial aspect in a multitude of applications and fields; several design and operational parameters influence this performance. This study focuses on the issue of flow maldistribution and its effect on the HX thermal performance. For this purpose, an experimental setup is designed and implemented to emulate the conditions under which an automotive heat exchanger operates in regard to the non-uniform upstream airflow velocity distribution over the HX surface. The setup allows obtaining various configurations of airflow velocity non-uniformity of some desired mean velocity and standard deviation. The experimental results reveal that a higher degree of non-uniformity (higher standard deviation of the velocity distribution) causes an increased deterioration of the HX thermal performance. For example, at a water flowrate of 200 L/h and a mean airflow velocity of 2 m/s, increasing the standard deviation from 0 to 2 m/s (i.e., moving from the lowest to highest degrees of non-uniformity) causes a total deterioration of 27% in the performance (3.78 to 2.75 kW, respectively), which can also be observed in the increased level of outlet water temperature (53.8 to 58.2 °C, respectively). The obtained results confirm the numerical results reported in the literature.Keywords
This publication has 35 references indexed in Scilit:
- Effect of non-uniform air velocity distribution on evaporator performance and its improvement on a residential air conditionerApplied Thermal Engineering, 2012
- Spatial optimization of an underhood cooling module – Towards an innovative control approachApplied Energy, 2011
- Analytical and empirical determination of thermal performance of louvered heat exchanger – Effects of air flow statisticsInternational Journal of Heat and Mass Transfer, 2011
- The effect of flow maldistribution on the evaluation of axial dispersion and thermal performance during the single-blow testing of plate heat exchangersInternational Journal of Heat and Mass Transfer, 2010
- A new method for simultaneous measurement of convective and radiative heat flux in car underhood applicationsMeasurement Science and Technology, 2010
- Effect of temperature and flow nonuniformity on transient behaviour of crossflow heat exchangerInternational Journal of Heat and Mass Transfer, 2008
- Performance Prediction of Compact Fin-and-Tube Heat Exchangers in Maldistributed AirflowHeat Transfer Engineering, 2007
- Transient response of plate heat exchangers considering effect of flow maldistributionInternational Journal of Heat and Mass Transfer, 2005
- Theoretical analysis and experimental confirmation of the uniformity principle of temperature difference field in heat exchangerInternational Journal of Heat and Mass Transfer, 2002
- Thermal Performance Reduction in Air-Cooled Heat Exchangers Due to Nonuniform Flow and Temperature DistributionsHeat Transfer Engineering, 1996