Comparative study of a-C:H:SiOx coatings based on TMSAc and HMDSO precursors prepared by PECVD
Authors:
- Štěpánka KelarováŠKŠtěpánka Kelarová
- Richard VáclavikRVRichard Václavik
- Roman PřIbylRPRoman PřIbyl
- Monika StupavskaMSMonika Stupavska
- Ondrej KubinecOKOndrej Kubinec
- OndřEj JašekOJOndřEj Jašek
- Vilma BuršíkováVBVilma Buršíková
Preprint
- 20 April 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
The main aim of the present study was to prepare a-C:H:SiOx coatings with sufficient mechanical properties from the mixture of CH4 with trimethylsilyl acetate (TMSAc) or hexamethyldisiloxane (HMDSO) organosilicon precursor using plasmas of RF capacitively coupled glow discharge. Studied coatings were prepared using various precursor ratios in the reaction mixtures, ranging from 7.1% to 92.9%, at a constant discharge power of 75 W. The included research work discusses in detail the evolution of the chemical composition and mechanical characteristics of the resulting a-C:H:SiOx films as a function of the variable precursor ratio and the type of precursor. In this study, various materials with a smooth surface structure were produced. Gradual increase in the precursor ratio induced significant structural changes, resulting in the transition from a-C:H:SiOx coatings with a remarkable hardness of ∼11 GPa to soft polymer-like matrices reaching hardness below 1 GPa. This research work also describes in detail the differences between TMSAc- and HMDSO-based materials.Hard a-C:H:SiOx coatings with excellent fracture resistance exhibiting a low friction coefficient in the range 0.08±0.01 can be achieved using both precursors. Under certain conditions, HMDSO may be replaced by a less toxic TMSAc to prepare materials exhibiting comparable mechanical properties.Keywords
This publication has 74 references indexed in Scilit:
- Deposition of Thin Films From HMDSO Utilizing the Vacuum UV Radiation From an Atmospheric PlasmaPlasma Processes and Polymers, 2024
- Effect of self‐bias voltage on the nanoscale morphological properties of corn starch‐based films modified by hexamethyldisiloxane plasmaPlasma Processes and Polymers, 2023
- Deposition of anti‐fog coatings on glass substrates using the jet of an open‐to‐air microwave argon plasma at atmospheric pressurePlasma Processes and Polymers, 2020
- C 1s Peak of Adventitious Carbon Aligns to the Vacuum Level: Dire Consequences for Material's Bonding Assignment by Photoelectron SpectroscopyChemphyschem, 2017
- Plasma Enhanced CVD of Organosilicon Thin Films on Electrospun Polymer NanofibersPlasma Processes and Polymers, 2015
- Densification and Hydration of HMDSO Plasma PolymersPlasma Processes and Polymers, 2014
- a‐SiC:H films deposited by PECVD for MEMS applicationsphysica status solidi (c), 2010
- On the Plasma Chemistry of CH4-H2-Ar System Relevant to Diamond Deposition Process by Plasma Enhanced Chemical Vapor DepositionPlasma Processes and Polymers, 2009
- Chemical Vapor Deposition of Organosilicon Thin Films from MethylmethoxysilanesPlasma Processes and Polymers, 2005
- FTIR Plasma Phase Analysis of Hexamethyldisiloxane Discharge in Microwave Multipolar Plasma at Different Electrical PowersPlasma Processes and Polymers, 2004