Study on Influential Mechanism of Trailing Edge Sweep Angle on Aerodynamic Noise of a Centrifugal Air Compressor
Open Access
Abstract
As the main noise source in the hydrogen fuel cell system, the noise level of the centrifugal air compressor greatly affects the comfort of the hydrogen fuel cell vehicle, and can be effectively reduced by optimizing the trailing edge sweep angle of the blade. In this paper, the computational fluid dynamics model was used to study the influence of the trailing edge sweep angle on the aerodynamic performance and flow characteristics of a centrifugal air compressor for vehicle fuel cells. The Ffowcs Williams–Hawkings equation and the computational fluid dynamics–boundary element coupling method were adopted to calculate the dipole source strength on the surface of the blade and the radiated aerodynamic noise, respectively, under the different trailing edge sweep angles. The results showed that the trailing edge sweep could lead to an increase in pressure ratio as well as isentropic efficiency, and a decrease in the intensity of flow separation. Meanwhile, the sound pressure level of the compressor under each working condition could be effectively reduced by the trailing edge sweep. When the rotation speed was 80,000 r·min−1 and the blade trailing edge sweep angle was 15°, the sound pressure level of the radiated aerodynamic noise was 5.8 dBA lower than that without sweep.Keywords
Funding Information
- National Key Research and Development Program of China (2019YFB1504604)
This publication has 4 references indexed in Scilit:
- Verification and Validation of CFD Modeling for Low-Flow-Coefficient Centrifugal Compressor StagesEnergies, 2021
- CFD Simulation and Experimental Study of Working Process of Screw Refrigeration Compressor with R134aEnergies, 2019
- Sound generation in centrifugal compressorsJournal of Sound and Vibration, 2008
- Analysis and optimization of aerodynamic noise in a centrifugal compressorJournal of Sound and Vibration, 2006