Sub-μW Front-End Low Noise Amplifier for Neural Recording Applications
Authors:
- 12 June 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 305-308
Abstract
Multi-channel neural recording systems are more and more required for neuroscience research and to cope with neurological disorders. Such systems are based on brain-implantable integrated devices with stringent requirements on supply voltage, power consumption and area footprint. A very low power, low noise fully differential front-end amplifier for neural signals processing is presented in this paper. The proposed amplifier architecture exploits two fully differential OTAs with Arbel topology operating in sub-threshold, and allows AC coupling with a high offset electrode while guaranteeing a very low high-pass cut-off frequency without increasing the equivalent input noise. The neural recording front-end has been designed referring to a 0.13-μm CMOS process. The proposed amplifier operates with a supply voltage as low as 0. 3V with a mid-band gain of 40dB and a -3dB bandwidth from 0.1 Hz to 10 kHz. Input referred noise and total power consumption are 11 μVrms and 277nW respectively.Keywords
This publication has 14 references indexed in Scilit:
- A Sub-$\mu$ W Reconfigurable Front-End for Invasive Neural Recording That Exploits the Spectral Characteristics of the Wideband Neural SignalIEEE Transactions on Circuits and Systems I: Regular Papers, 2020
- Area-Efficient Low-Power Bandpass Gm-C Filter for Epileptic Seizure Detection in 130nm CMOS2019
- A Sub-${\mu}$W/Ch Analog Front-End for $\Delta $-Neural Recording With Spike-Driven Data CompressionIEEE Transactions on Biomedical Circuits and Systems, 2018
- Modular 128-Channel $\Delta$ - $\Delta \Sigma$ Analog Front-End Architecture Using Spectrum Equalization Scheme for 1024-Channel 3-D Neural Recording MicrosystemsIEEE Journal of Solid-State Circuits, 2017
- A 2.2 μW analog front-end for multichannel neural recording2017
- An analog front-end circuit with spike detection for implantable neural recording system design2014
- A 0.45 V 100-Channel Neural-Recording IC With Sub-$\mu {\rm W}$/Channel Consumption in 0.18 $\mu{\rm m}$ CMOSIEEE Transactions on Biomedical Circuits and Systems, 2013
- A Fully Reconfigurable Low-Noise Biopotential Sensing Amplifier With 1.96 Noise Efficiency FactorIEEE Transactions on Biomedical Circuits and Systems, 2013
- Design of Ultra-Low Power Biopotential Amplifiers for Biosignal Acquisition ApplicationsIEEE Transactions on Biomedical Circuits and Systems, 2012
- A smart 16-channel front-end system for extracelluar neural recording2010