Studies on Polymeric hydroxy Compounds and Electro-coagulation Process for Removing Arsenic from ground water
Open Access
- 30 December 2022
- journal article
- research article
- Published by Oriental Scientific Publishing Company in Oriental Journal of Chemistry
- Vol. 38 (6) , 1428-1434
Abstract
This paper describes observations made on studies carried in laboratory trials by using electro-coagulation process using iron electrodes. The purpose of this study is to present the iron electrode-based EC procedure, its superiority over other technologies used for removing arsenic from ground water and surface water. In order to reduce arsenic (As), it was also necessary to understand the basics of the electrochemical process (EC) and the significance of its operating conditions, such as anode materials, applied voltage, pH and anode distance. At different concentration of Arsenic (500ppb, 200ppb & 100 ppb) it was observed that with the higher concentration i.e. 500 ppb there is faster decrease in arsenic concentration at 6.5 pH. While, when using different current density 0.5 A & 1.0 A at (12V) almost same results were obtained i.e. arsenic removal took place in same time duration at a pH range of 3.5 to 6.5. It was also observed that arsenic concentration decreases with electrode spacing, size of electrodes and contact time of treatment.Keywords
This publication has 17 references indexed in Scilit:
- Arsenic and fluoride contaminated groundwaters: A review of current technologies for contaminants removalJournal of Environmental Management, 2015
- Removal of arsenic from drinking water using dual treatment processClean Technologies and Environmental Policy, 2014
- Effect of some operational parameters on the arsenic removal by electrocoagulation using iron electrodesJournal of Environmental Health Science and Engineering, 2014
- Removal of arsenite by simultaneous electro-oxidation and electro-coagulation processJournal of Hazardous Materials, 2010
- Factors influencing arsenic and nitrate removal from drinking water in a continuous flow electrocoagulation (EC) processJournal of Hazardous Materials, 2010
- Studies on a Mg‐Al‐Zn Alloy as an Anode for the Removal of Fluoride from Drinking Water in an Electrocoagulation ProcessCLEAN – Soil, Air, Water, 2009
- Ferrous and Ferric Ion Generation During Iron ElectrocoagulationEnvironmental Science & Technology, 2009
- Electrochemical Reactions for Electrocoagulation Using Iron ElectrodesIndustrial & Engineering Chemistry Research, 2009
- Removal of dye stuffs from waste water: Electrocoagulation of Acilan Blau using soluble anodeJournal of Environmental Science and Health . Part A: Environmental Science and Engineering and Toxicology, 1992
- Electrocoagulation neutralization of chromium containing effluentMetallurgist, 1977