Modelling AC Induction Along a Pipeline Aligned With an Overhead Power Line: Analysis, Simulations and Field Measurements
Open Access
- 1 January 2026
- journal article
- Published by Institution of Engineering and Technology (IET) in IET Science, Measurement & Technology
- Vol. 20 (1)
Abstract
The AC voltage is induced along a pipeline when an overhead power line is aligned with the pipeline. The AC induction needs to be analysed and determined even with cathodic protection systems (CPS) protecting pipelines, storage tanks, and many other metal surfaces in various industries to prevent electrochemical corrosion. Hence, the design and accurate operation of a CPS needs a proper model to monitor and assess the condition of pipelines aligned with overhead power lines. Conventional pipeline models, including lumped resistances introducing cables and connections, anode beds, and metal structures, do not represent the stated AC induction. This paper suggests a non‐uniform distributed model for pipelines aligned with overhead power lines driven by the CPS to determine the voltage profile across the long metal surfaces such as pipelines. The case study is an 11.5 km pipeline for gas transmission from a gas field located west of Iran, aligned with a three‐phase 20 kV overhead power line. First, the parameters of this gas pipeline model are analysed and obtained, which include resistances, non‐uniform inductances, and capacitances. Then, simulations are introduced for the developed distributed model. Finally, the voltage profile of the pipeline is obtained experimentally by measuring 23 points along the pipeline to confirm the model and simulations; also, waveforms of electrical potentials related to both ends and the midpoint are recorded by a portable oscilloscope for further verifications. Experimental results desirably validate the analytical distributed model and simulations.Keywords
This publication has 21 references indexed in Scilit:
- Characterization and potential distribution mapping of cathodically protected buried pipelines based on homogeneous and heterogenous factorsJournal of Pipeline Science and Engineering, 2026
- Mitigation of the AC corrosion of the metallic pipelines using the hydroxide and solid-state polarization cells; A comparative studyElectric Power Systems Research, 2022
- A probabilistic-based model for dynamic predicting pitting corrosion rate of pipeline under stray current interferenceJournal of Pipeline Science and Engineering, 2021
- Global and local parameters for characterizing and modeling external corrosion in underground coated steel pipelines: A review of critical factorsJournal of Pipeline Science and Engineering, 2021
- Mitigation of electrical hazards on the metallic pipelines due to the HVOHTLs based on different intelligent controllersIET Science, Measurement & Technology, 2020
- Design and analysis of the cathodic protection system of oil and gas pipelines, using distributed equivalent circuit modelJournal of Natural Gas Science and Engineering, 2020
- Characterization of the frequency dependence of the electrical properties of sandy soil with variable grain size and water contentIEEE Transactions on Dielectrics and Electrical Insulation, 2019
- The study of substation grounding grid impressed current cathodic protection systems based on COMSOL multiphyscis2018
- Location estimation of coating defects and mitigation of induced AC voltages along buried gas pipelineIET Science, Measurement & Technology, 2018
- Time domain reflectometry measurement principles and applicationsHydrological Processes, 2002