A Study on the Effect of the Contact Point and the Contact Force of a Glass Fiber under End-Face Polishing Process
Authors:
Open Access
- 2 July 2015
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2015, 1-8
Abstract
The offset between the center lines of the polished end-face and the fiber core has a significant effect on coupling efficiency. The initial contact point and the contact force are two of the most important parameters that induce the offset. This study proposes an image assistant method to find the initial contact point and a mathematical model to estimate the contact force when fabricating the double-variable-curvature end-face of single mode glass fiber. The repeatability of finding the initial contact point via the vision assistant program is 0.3 μm. Based on the assumption of a large deflection, a mathematical model is developed to study the relationship between the contact force and the displacement of the lapping film. In order to verify the feasibility of the mathematical model, experiments, as well as DEFORM simulations, are carried out. The results show that the contact forces are alomst linearly proportional to the feed amounts of the lapping film and the errors are less than 9%. By using the method developed in this study, the offset between the grinding end-face and the center line of the fiber core is within 0.15 to 0.35 μm.Keywords
Funding Information
- National Science Council (NSC 102-2221-E-230-005)
This publication has 7 references indexed in Scilit:
- The Effect of the Broken Edge on the Concentricity of the Micro-Polished Optical Fiber End-FaceApplied Mechanics and Materials, 2013
- New Scheme of Double-Variable-Curvature Microlens for Efficient Coupling High-Power Lasers to Single-Mode FibersJournal of Lightwave Technology, 2010
- Wear behavior of the abrasive grains used in optical glass polishingJournal of Materials Processing Technology, 2009
- Optical fiber polishing automation with on-line force sensingInternational Journal of Machine Tools and Manufacture, 2007
- Material Removal Mechanisms in Lapping and PolishingCIRP Annals, 2003
- Anamorphic microlens for laser diode to single-mode fiber couplingIEEE Photonics Technology Letters, 1995
- Large deflection of cantilever beamsQuarterly of Applied Mathematics, 1945