Ying-Chien Tsai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Ying-Chien Tsai has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Hsien-Yuan Lin
2 shared publicationsCheng-An Hsu
Department of Mechanical Engineering, Cheng Shiu University, Kaohsiung 833, Taiwan
1 shared publicationGuang-Miao Huang
Department of Mechanical & Electro-Mechanical Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan
1 shared publicationInnchyn Her
Department of Mechanical & Electro-Mechanical Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan
1 shared publicationLi-Jin Wang
Department of Photonics, National Sun Yat-Sen University, Kaohsiung, Taiwan
1 shared publicationMing-Chun Hsieh
Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University, Kaohsiung, Taiwan
1 shared publication
Latest Publications
- Open Access
- 2 July 2015
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2015, 1-8
A Study on the Effect of the Contact Point and the Contact Force of a Glass Fiber under End-Face Polishing Process
The offset between the center lines of the polished end-face and the fiber core has a significant effect on coupling efficiency. The initial contact point and the contact force are two of the most important parameters that induce the offset. This study proposes an image assistant method to find the initial contact point and a mathematical model to estimate the contact force when fabricating the double-variable-curvature end-face of single mode glass fiber. The repeatability of finding the initial contact point via the vision assistant program is 0.3 μm. Based on the assumption of a large deflection, a mathematical model is developed to study the relationship between the contact force and the displacement of the lapping film. In order to verify the feasibility of the mathematical model, experiments, as well as DEFORM simulations, are carried out. The results show that the contact forces are alomst linearly proportional to the feed amounts of the lapping film and the errors are less than 9%. By using the method developed in this study, the offset between the grinding end-face and the center line of the fiber core is within 0.15 to 0.35 μm.
- 2 July 2015
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2015, 1-8
Open AccessA Study on the Effect of the Contact Point and the Contact Force of a Glass Fiber under End-Face Polishing Process
The offset between the center lines of the polished end-face and the fiber core has a significant effect on coupling efficiency. The initial contact point and the contact force are two of the most important parameters that induce the offset. This study proposes an image assistant method to find the initial contact point and a mathematical model to estimate the contact force when fabricating the double-variable-curvature end-face of single mode glass fiber. The repeatability of finding the initial contact point via the vision assistant program is 0.3 μm. Based on the assumption of a large deflection, a mathematical model is developed to study the relationship between the contact force and the displacement of the lapping film. In order to verify the feasibility of the mathematical model, experiments, as well as DEFORM simulations, are carried out. The results show that the contact forces are alomst linearly proportional to the feed amounts of the lapping film and the errors are less than 9%. By using the method developed in this study, the offset between the grinding end-face and the center line of the fiber core is within 0.15 to 0.35 μm.
- 30 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 29 (6) , 898-904
New Scheme of Double-Variable-Curvature Microlens for Efficient Coupling High-Power Lasers to Single-Mode Fibers
A new scheme of a double-variable-curvature microlens (DVCM) employing a single-step grinding technique with fully automated fabrication for efficient coupling between high-power 980-nm laser diodes and single-mode fibers is proposed and demonstrated. The grinded fiber endface exhibited a double-variable curvature in the major axis, and was clearly observed for both major and minor axes after slight fusion polish. The perfect aspherical shape of the DVCM results in less grinding offset of 0.2 μm and better curvature radii control that leads to high average coupling efficiency of 83%. This clearly indicates that the performance of the DVCM can achieve high average coupling efficiency better than any other grinding techniques to form asymmetric microlenses. The versatility in double-variable-curvature design, fully automated fabrication, and the excellent performance of aspherical microlens makes the proposed DVCM extremely attractive for use in many lightwave interconnection applications.
- 30 December 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 29 (6) , 898-904
New Scheme of Double-Variable-Curvature Microlens for Efficient Coupling High-Power Lasers to Single-Mode Fibers
A new scheme of a double-variable-curvature microlens (DVCM) employing a single-step grinding technique with fully automated fabrication for efficient coupling between high-power 980-nm laser diodes and single-mode fibers is proposed and demonstrated. The grinded fiber endface exhibited a double-variable curvature in the major axis, and was clearly observed for both major and minor axes after slight fusion polish. The perfect aspherical shape of the DVCM results in less grinding offset of 0.2 μm and better curvature radii control that leads to high average coupling efficiency of 83%. This clearly indicates that the performance of the DVCM can achieve high average coupling efficiency better than any other grinding techniques to form asymmetric microlenses. The versatility in double-variable-curvature design, fully automated fabrication, and the excellent performance of aspherical microlens makes the proposed DVCM extremely attractive for use in many lightwave interconnection applications.
- 20 April 2006
- Published by Techno-Press in STRUCTURAL ENGINEERING AND MECHANICS
- Vol. 22 (6) , 701-717
On the natural frequencies and mode shapes of a multiple-step beam carrying a number of intermediate lumped masses and rotary inertias
- 20 April 2006
- Published by Techno-Press in STRUCTURAL ENGINEERING AND MECHANICS
- Vol. 22 (6) , 701-717
On the natural frequencies and mode shapes of a multiple-step beam carrying a number of intermediate lumped masses and rotary inertias
- 20 October 2005
- Published by Techno-Press in STRUCTURAL ENGINEERING AND MECHANICS
- Vol. 21 (3) , 351-367
On the natural frequencies and mode shapes of a uniform multi-span beam carrying multiple point masses
- 20 October 2005
- Published by Techno-Press in STRUCTURAL ENGINEERING AND MECHANICS
- Vol. 21 (3) , 351-367
On the natural frequencies and mode shapes of a uniform multi-span beam carrying multiple point masses