Effect of cutting parameters on surface roughness of waste-filled composite at milling
- 1 March 2022
- journal article
- research article
- Published by Emerald Publishing in Emerging Materials Research
- Vol. 11 (1) , 12-18
Abstract
Industrial waste is a problem for companies as well as for the environment. In recent years, an alternative solution to this problem has been found – the use of waste in the production of new composite materials. It is not enough to produce only the composite. The machinability of the composite produced should also be investigated. This study obtained the new composite material using industrial waste produced by glass fibre-reinforced plastic pipes. The terephthalic resin was used as a matrix material. The waste powder was used as a filling material in the ratio of 30, 40 and 50% by weight compared to the matrix material. The machinability of produced composites was investigated according to three parameters with three levels. According to the experimental results, the optimum cutting parameters are obtained, depending on surface roughness.Keywords
This publication has 15 references indexed in Scilit:
- Composites obtained by recycling carbon fibre/epoxy composite wastes in building materialsConstruction and Building Materials, 2019
- Response Surface Methodology Integrated with Desirability Function and Genetic Algorithm Approach for the Optimization of CNC Machining ParametersArabian Journal for Science and Engineering, 2018
- Gamma-ray-shielding properties of composite materials made of recycled sport footwearInternational Journal of Environmental Science and Technology, 2018
- Lightweight expanded aggregates from the mixture of waste automotive plastics and clayConstruction and Building Materials, 2017
- Production and characterization of a hybrid polymer matrix compositePolymer Composites, 2017
- Composite panels obtained from automotive waste plastics and agricultural macadamia shell wasteJournal of Cleaner Production, 2017
- Optimization of surface roughness and tool wear in hard turning of austempered ductile iron (grade 3) using Taguchi methodMeasurement, 2016
- Surface roughness model and parametric optimization in machining of GFRP composite: Taguchi and Response surface methodology approachMaterials Today: Proceedings, 2015
- Taguchi design and response surface methodology based analysis of machining parameters in CNC turning under MQLJournal of Cleaner Production, 2014
- SURFACE ROUGHNESS PARAMETERS OPTIMIZATION IN MACHINING A356/SiC/20pMETAL MATRIX COMPOSITES BY PCD TOOL USING RESPONSE SURFACE METHODOLOGY AND DESIRABILITY FUNCTIONMachining Science and Technology, 2008