In situ monitoring of used-sand regeneration in foundries by impedance spectroscopy
Open Access
- 11 October 2022
- journal article
- research article
- Published by Copernicus GmbH in Journal of Sensors and Sensor Systems
- Vol. 11 (2) , 287-298
Abstract
This work deals with the impedimetric monitoring of used-sand regeneration in the foundry industry. During the regeneration of used sand, a quartz sand similar to new sand is produced from already used molding and core sand, which especially serves to produce new cores. We explore whether the regeneration progress can be assessed in situ based on measured impedance spectra and their features. The impedances of plate capacitors filled with different typical used-sand mixtures, consisting of quartz sand, coal dust, and bentonite, were repeatedly measured in a frequency range from 500 Hz to 1 MHz. The reproducibility of the measurements proved to be sufficient for practical applications. The mean impedances were plotted in Nyquist diagrams. From these plots, systematic impedance–composition correlations could be determined for two of the three component systems. Conclusions about the regeneration state could be drawn from the impedance curves by introducing various features. These were the median, the mean, and the standard deviation of the frequency-dependent resistance and reactance. With these indicators, it was then possible to establish one-to-one relations between the material composition of the molding materials and the impedance measurement. In field measurements on regenerated used sands, this observation was confirmed, and the regeneration progress was observed on the basis of the impedimetrically determined characteristic data.Keywords
Funding Information
- Bundesministerium für Wirtschaft und Energie (ZF4152305DB8)
This publication has 17 references indexed in Scilit:
- Experimental-artificial intelligence approach for characterizing electrical resistivity of partially saturated clay linersApplied Clay Science, 2018
- Einführung in die Angewandte Mineralogie2017
- The effect of very low water content on the complex dielectric permittivity of clays, sand-clay and sand rocksMeasurement Science and Technology, 2016
- Effect of Sand Base Grade and Density of Moulding Sands with Sodium Silicate on Effectiveness of Absorbing MicrowavesArchives of Foundry Engineering, 2016
- Heat Absorption Capacity and Binder Degradation Characteristics of 3D Printed Cores Investigated by Inverse Fourier Thermal AnalysisInternational Journal of Metalcasting, 2016
- Low-frequency dielectric properties of three bentonites at different adsorbed water statesJournal of Colloid and Interface Science, 2013
- Deskriptive Statistik2009
- A method for measuring the solid particle permittivity or electrical conductivity of rocks, sediments, and granular materialsJournal of Geophysical Research, 2003
- Uncertainty ellipses and their application to interval estimation of emitter positionIEEE Transactions on Aerospace and Electronic Systems, 1997
- Characterization of the granular ceramic materials corundum and mullite by impedance spectroscopyJournal of Materials Science, 1991