Torque Ripple Suppression With Compensation Control Method for Permanent Magnet Synchronous Motor With Asymmetric Magnetomotive Force
- 30 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Energy Conversion
- Vol. 39 (3) , 1547-1571
Abstract
Due to manufacturing imperfections and assembly tolerances (MIAT), the actual motor inevitably deviates from the desired motor, which may significantly degrade its performance. To ease the influence of MIAT, researchers have studied both motor design and compensation control methods. Compared with the motor design method, compensation control is more cost-effective and flexible but has not been well investigated, especially for motors experiencing asymmetric magnetomotive force (AMMF) due to MIAT. The main purpose of this paper is to suppress the torque ripple for permanent magnet synchronous motor under AMMF caused by MIAT using the compensation control method. This paper firstly analyzes the influence of AMMF on electromagnetic torque performance, then derives the compensation currents for torque ripple suppression. Subsequently, a modified field-oriented-control is established. Moreover, it is found that MIAT can cause neutral voltage oscillation, which significantly affects the current tracking performance. Therefore, a novel space-vector-pulse-width-modulation is proposed to ease the influence of neutral voltage oscillation. The experiments confirmed that the proposed method can reduce the torque ripple by 87.8% and 80.8% during speed acceleration and steady state, respectively. Furthermore, this method has the advantages of better dynamic performance, improved frequency spectrum performance, and higher motor efficiency at high speeds.Keywords
Funding Information
- National Natural Science Foundation of China (11972078)
This publication has 26 references indexed in Scilit:
- Precise torque control for interior mounted permanent magnet synchronous motors with recursive least squares algorithm based parameter estimationsEngineering Science and Technology, an International Journal, 2022
- Investigation of Worst-Case Scenarios of Cogging Torque due to Manufacturing Tolerances in Stator Teeth Profile of 12-Slot/10-Pole Surface Permanent Magnet MotorsIET Conference Proceedings, 2021
- Influence of asymmetrical stator axes on the electromagnetic field and driving characteristics of canned induction motorIET Electric Power Applications, 2019
- Improved Sensorless Control for Permanent-Magnet Synchronous Motor with Self-Inductance Asymmetry2019
- Influences of Manufacturing Tolerance on Performance of Axial Flux-Switching Permanent Magnet Machine2018
- Investigation of Effects of Asymmetries on the Performance of Permanent Magnet Synchronous MachinesIEEE Transactions on Energy Conversion, 2017
- Influence of manufacturing tolerances on cogging torque in interior permanent magnet machines with eccentric and sinusoidal rotor contours2017
- Analysis of cogging torque caused by manufacturing tolerances of surface‐mounted permanent magnet synchronous motor for electric power steeringIET Electric Power Applications, 2016
- Analytical Prediction of Torque Ripple in Surface-Mounted Permanent Magnet Motors Due to Manufacturing VariationsIEEE Transactions on Energy Conversion, 2016
- Torque ripple minimization for PMSM using online estimation of the stator resistances2012