Reduction of the Effect of Machine Saturation on the Quality of Self-Sensing Control
- 28 October 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (2) , 2887-2900
Abstract
Saturation effects are one of the main challenges arising in rotor position estimation for a permanent magnet synchronous machine (PMSM). In this article, a method to cope with saturation effects for self-sensing control (SSC) of PMSMs is derived analytically. The applied SSC algorithm is based on a numerical optimization of a residual, which includes the inductance matrix of the machine. By taking the cross-coupling between the $d$- and $q$-axis into account, not only is the estimation error minimized, but also the application of SSC is enabled at heavily saturated operating points. This is achieved by using the additional information provided by the mutual inductance, which is used to model the cross-coupling. Furthermore, harmonic estimation errors caused by saturation effects are eliminated by applying a simplified analytical model of the harmonic components to the inductance matrix. With these approaches, the effects of saturation on the quality of the SSC are significantly reduced. Since both of these methods rely on exact knowledge of the machine's inductances, a technique to determine these is provided. All results are validated experimentally.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (329209868)
This publication has 25 references indexed in Scilit:
- Analytical Design of Self-Sensing Control for PMSM Using Quasi-Direct CalculationIEEE Open Journal of Industry Applications, 2023
- Experimental Investigation on the Self-Sensing Capability of Synchronous Machines for Signal Injection Sensorless Drives2021
- A Family of Adaptive Position Estimators for PMSM Using the Gradient Descent MethodIEEE Journal of Emerging and Selected Topics in Power Electronics, 2021
- Recent Advances in Sensorless Drive of Interior Permanent-Magnet Motor Based on Pulsating Signal InjectionIEEE Journal of Emerging and Selected Topics in Power Electronics, 2020
- Machine-Parameter-Independent Reduction of Harmonic Errors in Self-Sensing Control of PMSM2019
- Reduced observer for anisotropy-based position estimation of PM synchronous machines using current oversampling2017
- Compensation of switching dead-time effects in voltage-fed PWM inverters using FPGA-based current oversampling2016
- PMSM model for sensorless control considering saturation induced secondary saliencies2013
- Improved Rotor Position Estimation by Signal Injection in Brushless AC Motors, Accounting for Cross-Coupling Magnetic Saturation2007 IEEE Industry Applications Annual Meeting, 2007
- Carrier signal injection based sensorless control methods for IPM synchronous machine drives2004