Correlating Flame Location and Ignition Delay in Partially Premixed Combustion
Authors:
- 10 September 2012
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
Controlling ignition delay is the key to successfully enable partially premixed combustion in diesel engines. This paper presents experimental results of partially premixed combustion in an optically accessible engine, using primary reference fuels in combination with artificial exhaust gas recirculation. By changing the fuel composition and oxygen concentration, the ignition delay is changed.To determine the position of the flame front, high-speed visualization of OH-chemiluminescence is used, enabling a cycle-resolved analysis of OH formation. A clear correlation is observed between ignition delay and flame location.The mixing of fuel and air during the ignition delay period defines the local equivalence ratio, which is estimated based on a spherical combustion volume for each spray. The corresponding emission measurements using fast-response analyzers of CO, HC and NOX confirm the decrease in local equivalence ratio as a function of ignition delay.Furthermore multiple injection strategies are investigated, applying pilot as well as post injections, in combination with a main injection at constant load. From these results it is concluded that both pilot and post injections result in an increase of unburned hydrocarbon and CO emission and a slight decrease of nitric oxide emissions.Keywords
This publication has 18 references indexed in Scilit:
- Effects of Post-Injection Strategies on Near-Injector Over-Lean Mixtures and Unburned Hydrocarbon Emission in a Heavy-Duty Optical Diesel EngineSAE International Journal of Engines, 2011
- Effect of Post Injections on In-Cylinder and Exhaust Soot for Low-Temperature Combustion in a Heavy-Duty Diesel EngineSAE International Journal of Engines, 2010
- Advanced compression-ignition engines—understanding the in-cylinder processesProceedings of the Combustion Institute, 2009
- In-cylinder CO and UHC Imaging in a Light-Duty Diesel Engine during PPCI Low-Temperature CombustionSAE International Journal of Fuels and Lubricants, 2008
- Experimental Validation of a Surrogate Fuel for DieselSAE International Journal of Advances and Current Practices in Mobility, 2007
- Development of an Experimental Database and Kinetic Models for Surrogate Diesel FuelsSAE International Journal of Advances and Current Practices in Mobility, 2007
- Combination of High EGR Rates and Multiple Injection Strategies to Reduce Pollutant EmissionsSAE International Journal of Advances and Current Practices in Mobility, 2005
- Effects of Multiple Injections in a HSDI Diesel Engine Equipped with Common Rail Injection SystemSAE International Journal of Advances and Current Practices in Mobility, 2004
- Effect of Ignition Delay and Exhaust Gas Speed on Exhaust Odor in DI Diesel EnginesSAE International Journal of Advances and Current Practices in Mobility, 2002
- Influence of the Post-Injection Pattern on Performance, Soot and NOx Emissions in a HD Diesel EngineSAE International Journal of Advances and Current Practices in Mobility, 2002