Optimized Device Geometry of Normally-On Field-Plate AlGaN/GaN High Electron Mobility Transistors for High Breakdown Performance Using TCAD Simulation
Open Access
- 28 October 2021
- journal article
- research article
- Published by MDPI AG in Electronics
- Vol. 10 (21) , 2642
Abstract
This study presents the optimization of the lateral device geometry and thickness of the channel and barrier layers of AlGaN/GaN high electron mobility transistors (HEMTs) for the enhancement of breakdown voltage (VBR) characteristics using a TCAD simulation. The effect of device geometry on the device performance was explored by varying the device design parameters, such as the field plate length (LFP), gate-to-drain length (LGD), gate-to-source length (LGS), gate length (LG), thickness of the Si3N4 passivation layer (Tox), thickness of the GaN channel (Tch), and AlGaN barrier (Tbarrier). The VBR was estimated from the off-state drain current versus the drain voltage (IDS–VDS) curve, and it exhibited a strong dependence on the length and thickness of the parameters. The optimum values of VBR for all the device’s geometrical parameters were evaluated, based on which, an optimized device geometry of the field-plated AlGaN/GaN HEMT structure was proposed. The optimized AlGaN/GaN HEMT structure exhibited VBR = 970 V at IGS = 0.14 A/mm, which was considerably higher than the results obtained in previous studies. The results obtained in this study could provide vital information for the selection of the device geometry for the implementation of HEMT structures.Keywords
Funding Information
- Korea Evaluation Institute of Industrial Technology (20004314)
- Korea Electric Power Corporation (South Korea) (R20XO01-10)
This publication has 34 references indexed in Scilit:
- High breakdown voltage in AlGaN/GaN HEMTs using AlGaN/GaN/AlGaN quantum-well electron-blocking layersDiscover Nano, 2014
- Effect of GaN Channel Layer Thickness on DC and RF Performance of GaN HEMTs With Composite AlGaN/GaN BufferIEEE Transactions on Electron Devices, 2014
- Analytical modeling and analysis of Al m Ga1−m N/GaN HEMTs employing both field-plate and high-k dielectric stack for high-voltage operationJournal of Computational Electronics, 2013
- Field Plated AlGaN/GaN-on-Si HEMTs for High Voltage Switching ApplicationsJournal of the Korean Physical Society, 2011
- Design of AlGaN/GaN HEMTs employing mesa field plate for breakdown voltage enhancementSolid-State Electronics, 2010
- Field-Plate Engineering for HFETsIEEE Transactions on Electron Devices, 2005
- Design Optimization of High Breakdown Voltage AlGaN–GaN Power HEMT on an Insulating Substrate for$R_rm ONAhbox --V_B$Tradeoff CharacteristicsIEEE Transactions on Electron Devices, 2004
- Enhancement of breakdown voltage in AlGaN/GaN high electron mobility transistors using a field plateIEEE Transactions on Electron Devices, 2001
- Polarization effects, surface states, and the source of electrons in AlGaN/GaN heterostructure field effect transistorsApplied Physics Letters, 2000
- Trends in power semiconductor devicesIEEE Transactions on Electron Devices, 1996