Evaluation of Non-Wheat Noodle Machine Design with An Ergonomic Approach
Open Access
- 16 October 2023
- journal article
- research article
- Published by EDP Sciences in BIO Web of Conferences
- Vol. 69, 05001
Abstract
Designing machines without involving the human factor can cause users discomfort, fatigue, and health problems. Ergonomic criteria when designing machines can increase user effectiveness. PT. Noang Prima Utama uses an extruder to produce pasta under the “LocaPasta” brand. Complaints of pain in the neck and back for 1-3 days due to standing position, bending down, and arms reaching forward for a long-time during production. The research objective was to evaluate the extruder design using the anthropometric method. Anthropometric data were tested for uniformity, data adequacy, and the determination of percentiles. Machine dimensions were compared with user anthropometer data for design improvement. When feeding materials into the hopper, the operator’s working posture needed to be more ergonomically adequate due to raised arms and pushing the material bit by bit (repetitively). The evaluation of the machine design based on anthropometric dimensions reveals several improvements. The redesigned extruder machine includes changes such as adjusting the footstep height to 27.7 cm so that the height of the setting box to 120.95 cm from the footstep (adjusting to standing shoulder height), allowing rotation of the setting box and the hopper height from the footstep is parallel to the standing elbow height which is 92.1 cm. With the implementation of the new prototype, the operator’s working posture no longer involves bending over while adjusting the machine, and the arms can comfortably rest on the hopper while feeding the material.Keywords
This publication has 5 references indexed in Scilit:
- Approach for ergonomic assessment of self-propelled combine harvester seats based on anthropometric body dimensionsInternational Journal of Occupational Safety and Ergonomics, 2022
- Evaluation of uniformity of physical and texture quality in manufacture of gluten-free noodles using single-screw extruders: a case study on local SMEs in Subang district-IndonesiaFood Science and Technology, 2022
- PERBANDINGAN DATA ANTROPOMETRI BERDASARKAN SUKU DI INDONESIAJURNAL REKAYASA SISTEM INDUSTRI, 2019
- FAKTOR RISIKO ERGONOMI DENGAN TERJADINYA KELUHAN MUSCULOSKELETAL DISORDERS PADA PEKERJA OVERHAULThe Indonesian Journal of Occupational Safety and Health, 2018
- Relationship between musculoskeletal disorders and anthropometric indices among bus drivers in Zahedan cityInternational Journal of Occupational Safety and Ergonomics, 2017