Investigation of mechanical properties and thermal conductivity coefficients of 3D printer materials
Open Access
- 15 December 2023
- journal article
- research article
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 7 (3) , 146-156
Abstract
The demand for 3D printer technology and products, one of the additive manufacturing methods, is increasing daily in the sectoral and academic fields. Many types of polymer-based filaments are used in 3D printers, pure or filled/reinforcement. Utilizing these specialized materials in places suitable for their mechanical and thermal properties will help efficiently use resources. Using 3D printers, it is possible to manufacture products that provide thermal insulation or good heat conduction in heating and cooling areas. Especially due to the energy requirements for heating and cooling, it is very important to know the thermal performance of materials to ensure and maintain energy efficiency. This study experimentally investigated the mechanical properties and heat conduction coefficients of 3D printed parts. The experiments were conducted with seven different filament materials (PLA, PLA+, PLA-CF, PLA Wood, Tough PLA, ABS+, TPU) and three layer thicknesses (0.1, 0.2, and 0.3 mm). Samples for tensile testing, hardness, and thermal conductivity coefficient measurements were produced, and measurements were performed. In the experiments, the highest tensile strength was obtained in PLA-CF with 0.3 mm layer thickness, and the lowest tensile strength was obtained in PLA Wood with 0.3 mm layer thickness. Tensile strength decreased with an increasing layer thickness in PLA, PLA Wood, ABS+, and TPU, while it increased in PLA-CF. The highest tensile strength of PLA+ was determined to be 0.2 mm and 0.1 mm layer thickness in Tough PLA. Hardness results showed minimal change in hardness values with increasing layer thickness. The thermal conductivity values of the samples varied according to the additives and layer thicknesses. The highest thermal conductivity increase was measured in PLA-CF with 11.84%, and the lowest thermal conductivity decrease was measured in Tough PLA with 9.44%.Keywords
This publication has 34 references indexed in Scilit:
- Mechanical performance of 3D printed polylactide during degradationAdditive Manufacturing, 2021
- Effect of printing layer thickness on water absorption and mechanical properties of 3D-printed wood/PLA composite materialsThe International Journal of Advanced Manufacturing Technology, 2019
- Effect of surface treatment of cellulose fiber (CF) on durability of PLA/CF bio-compositesCarbohydrate Polymers, 2019
- Process-structure-property effects on ABS bond strength in fused filament fabricationAdditive Manufacturing, 2018
- Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap jointsJournal of Mechanical Science and Technology, 2017
- Three-Dimensional Printing of Plastics2017
- Enhanced Thermal Conductivity in a Hybrid Graphite Nanoplatelet – Carbon Nanotube Filler for Epoxy CompositesAdvanced Materials, 2008
- The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube compositeCarbon, 2006
- High Thermal Conductivity Materials2006
- Polyurethane elastomersProgress in Polymer Science, 1991