Stability and transition for long-duration hypersonic flat-plate boundary layer considering wall thermal effect
- 1 June 2025
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (6)
Abstract
Current flight tests and wind tunnel experiments face challenges in obtaining long-duration hypersonic flow processes and thermal environments. Numerical simulation is an effective tool to study wall thermal effects—thermal radiation heat exchange and internal thermal conduction—and their influence on flow transition. This study employs linear stability theory (LST) and direct numerical simulation to analyze a 10-mm-thick C/SiC composite flat plate under three Mach numbers (6, 10, 15) at 30 km altitude, considering internal thermal conduction. The results of hypersonic base flow, flow stability, and transition are compared with and without surface radiation under long-duration conditions. Results demonstrate that the wall temperature ratio (Sw = Tw/T0) serves as a key indicator of wall thermal effects: larger Sw increments correlate with enhanced wall thermal effects. Surface radiation suppresses the temperature rise at the wall, resulting in decreased Sw increments. Sw (with/without radiation) decrease along the streamwise direction while increasing over time. Wall thermal effects increase boundary layer thickness and induce significant modifications to the base flow profile. Larger increments in Sw occur near the plate leading edge, indicating stronger wall thermal effects in this region. LST analysis shows that wall thermal effects shift the second-mode instability to lower frequencies, reduce maximum growth rates, and delay transition locations. Higher Mach numbers reduce the Sw increment, diminishing wall thermal effects and consequently the transition delay extent.Keywords
Funding Information
- National Natural Science Foundation of China (11732011)
This publication has 29 references indexed in Scilit:
- Multiscale coupling simulation of surface catalytic effect on hypersonic aerothermodynamic environmentInternational Journal of Heat and Mass Transfer, 2024
- Effect of surface cooling on second-mode dominated hypersonic boundary layer transitionExperiments in Fluids, 2021
- Advances in critical technologies for hypersonic and high-enthalpy wind tunnelChinese Journal of Aeronautics, 2020
- Time-adaptive loosely coupled analysis on fluid–thermal–structural behaviors of hypersonic wing structures under sustained aeroheatingAerospace Science and Technology, 2018
- Numerical simulation of local wall heating and cooling effect on the stability of a hypersonic boundary layerInternational Journal of Heat and Mass Transfer, 2018
- Conjugate Heat Transfer Study in Hypersonic FlowsJournal of The Institution of Engineers (India): Series C, 2017
- Effect of wall-cooling on Mack-mode instability in high speed flat-plate boundary layersApplied Mathematics and Mechanics, 2016
- Effect of the local wall cooling/heating on the hypersonic boundary layer stability and transition2015
- Experiments on stability and transition at Mach 3Journal of Fluid Mechanics, 2002
- Experimental studies of stability and transition in high-speed wakesJournal of Fluid Mechanics, 1999