WCWei Cao

Wei Cao

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Wei Cao has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Research on the flow separation characteristics of shock wave-boundary layer interaction

    by Hui Zhang, Deyu Gai, Wei Cao

    Laminar flow separation caused by shock wave-boundary layer interaction is a critical issue for supersonic vehicles, which significantly affects their aerodynamic performance. In-depth studies of the flow separation characteristics and accurate predictions of the separation zone dimensions are essential for optimizing flow control strategies and determining the location of the peak heat flux. This study focuses on the incident shock wave flat plate model and employs direct numerical simulation to investigate the separation flow caused by an incident shock wave-laminar boundary layer under varying shock intensities and wall temperatures. The research results show that with increasing shock intensity, a secondary separation zone appears within the separation region, and the emergence of this secondary zone increases the normal pressure gradient of the primary separation zone. The size of the secondary separation zone first increases, then decreases, and ultimately vanishes as the wall temperature increases. Additionally, based on the Katzer prediction formula, the separation bubble dimension prediction formula was optimized by considering the effects of wall temperature. Experimental and numerical validations demonstrate that the optimized formula can predict the scale of the primary separation zone in the Mach number range of 1.6–15 and wall temperature ratios of 0.2–1. The formula exhibits excellent predictive accuracy under both adiabatic and isothermal wall conditions and remains reliable in accurately predicting the primary separation bubble dimension even in the presence of secondary separation.

  • Destabilizing effects of oxidation-driven mass injection on the second mode of high-speed flows under conjugate heat transfer

    by Leibao Han, Yufeng Han, Wei Cao

    Flow stability in high-speed boundary layers is critically influenced by high-temperature gas effects and surface reactions occurring on thermal protection materials. In this study, linear stability theory has been employed to investigate the effects of wall catalysis and ablation on flow stability during unsteady flow-solid conjugate heat transfer over a blunt cone with a Mach number of 15.99. The key physical insight is that oxidation-driven mass injection is the primary mechanism destabilizing the second-mode disturbance. Specifically, the oxidation reaction injects mass at the wall, thickening the boundary layer and shifting the second mode to a lower frequency with an enhanced growth rate, which expands the unstable region upstream. In contrast, a temporal increase in wall temperature, regardless of whether catalysis or ablation occurs, gradually stabilizes the second mode by lowering its frequency and reducing its growth rate. Boundary conditions for mass fraction and velocity perturbations are found to have negligible influence on the linear stability theory results.

  • Coupled effects of thermochemical nonequilibrium and roughness-induced flow structures on wall heat flux in hypersonic flow

    by Zhen Guo, Wei Cao

    Local roughness structures on hypersonic vehicle surfaces are commonly induced by ablation, manufacturing imperfections, or in-service damage. Numerical simulations are performed for two representative roughness types, namely, isolated and distributed configurations, to investigate the coupled effects of high-temperature real-gas phenomena and roughness geometry on wall heat flux. The results show that for an isolated roughness element, the recirculating vortex within the windward-side separation region promotes chemical dissociation, leading to an increased degree of molecular dissociation and a reduction in the local wall heat flux. As the freestream Mach number and roughness height increase, the windward-side separation region expands and secondary vortical structures emerge. As a result, the local heat-flux distribution changes from a single-peak pattern to a multi-peak pattern, and the endothermic effect associated with chemical reactions induced by the recirculating flow becomes increasingly pronounced. In contrast, the expansion in the leeward-side separation region suppresses high-temperature dissociation reactions. For distributed roughness, the local wall heat flux exhibits periodic peak distributions corresponding to the periodic roughness pattern. The variation in these peaks is only weakly affected by thermochemical nonequilibrium but is mainly governed by the successive expansion and compression waves in the flow field.

  • Investigation of mixing enhancement mechanisms in a cavity-based combustor with an upstream wavy wall

    by Kaifeng Wang, Wei Cao

    The cavity in a scramjet combustor plays a crucial role in stabilizing combustion, and fuel injection upstream of the cavity can enhance the mixing process within the combustor. It has been found that the installation of a periodic wavy wall in front of the injection hole can induce streamwise vortices, promoting deeper penetration of the fuel into the main flow and enabling more thorough mixing. This configuration can further expand the mixing-enhanced region and improve the overall mixing efficiency. To better understand the mechanism by which an upstream wavy wall enhances fuel mixing in cavity-type supersonic combustors, a numerical investigation using the large eddy simulation method is conducted. The study focuses on a cavity-based combustor with a wavy wall having an amplitude of 1.5 mm and a wave number of 1.5. Results show that, compared to the baseline case, the wavy wall generates oblique and reflected shocks, which increase the size of the subsonic and high-temperature regions in the combustor. This leads to enhanced flame propagation upstream and deeper penetration of the fuel jet into the main flow. The wavy wall is also capable of inducing both streamwise and spanwise vortices, thereby increasing the circulation of velocity in the vicinity of the wavy wall and in the upstream region of the cavity. In particular, the velocity circulation near the wavy wall is increased by approximately 25 m2/s. Furthermore, the analysis of pressure oscillations at the cavity floor reveals that the wavy wall enhances the size of periodically formed combustible fluid packets. As a result, combustion oscillations within the combustor are intensified.

  • Investigation on applicability of multicomponent mass diffusion models in hypersonic boundary layer

    by Zhen Guo, Jiapeng Li, Yufeng Han, Wei Cao

    In hypersonic flight, high-temperature thermochemical reactions make accurate modeling of mass-diffusion heat flux essential for reliable surface heat-flux prediction and thermal protection design. The accuracy and applicability of six approximate mass-diffusion models are systematically assessed against the classic Stefan–Maxwell formulation, which serves as the benchmark owing to its superior accuracy. The physical origins of the heat-flux deviations are further analyzed based on the intrinsic characteristics of each model. The results confirm that, for typical hypersonic cylindrical configurations, the classical binary scaling method can be effectively applied to analyze wall heat flux of varying radii. By incorporating the characteristics of the wall heat-flux distribution, a mapping relation is established that converts the heat-flux analysis from geometries of different scales to the stagnation-point heat flux of a reference configuration. Deviations from the approximate models occur not only in the case of diffusive heat flux but also indirectly in the conductive component. The magnitude of deviation generally increases with Mach number and decreases with altitude, with the primary physical source identified as the atomic oxygen diffusion flux deviation near the wall. This work provides practical criteria to select suitable diffusion models by jointly considering accuracy and computational efficiency.


  • Improved two-temperature model of hypersonic thermochemical nonequilibrium flows with correction of non-Boltzmann effect for air

    by Rui Xiong, Yufeng Han, Wei Cao

    The accurate determination of chemical reaction rates is a prerequisite for precisely simulating hypersonic thermochemical nonequilibrium flows. Traditional two-temperature (2-T) models fail to capture the non-Boltzmann (NB) effects of vibrational energy-level distributions. This deficiency leads to inaccurate prediction of chemical reaction rates and hinders precise simulation of nonequilibrium flow. This paper conducted computational studies on the oxygen dissociation and recombination reactions, which are most significantly influencing nonequilibrium relaxation in air components, using the high-fidelity state-to-state (STS) method. The effects and patterns of NB effects on these reactions were investigated, and a correction method incorporating NB effects was proposed. This method was further integrated with the single-group linear maximum entropy model considering internal energy nonequilibrium, resulting in an improved thermochemical nonequilibrium model that accounts for NB effects. The proposed improved model provides accurate chemical reaction rate values. Numerical simulations of relaxation processes behind normal shock waves and flow fields around a hemisphere were performed using this model, yielding results consistent with STS method calculations. The computed outcomes exhibited better agreement with experimental data compared to traditional 2-T Park model, demonstrating the feasibility and validity of the proposed improved air-component thermochemical nonequilibrium model.


  • Quantification and zoning of chemical non-equilibrium effects in hypersonic flows

    by Zhen Guo, Yufeng Han, Wei Cao

    High-temperature-induced chemical non-equilibrium effects critically influence the prediction of aerodynamic performance, assessment of thermal environments, and optimization of hypersonic vehicle designs. The local Damköhler number (DaL) is proposed as a dimensionless parameter for quantifying the degree of chemical non-equilibrium in flow fields. Based on this parameter, a derived zoning criterion DaL1 is further established to segment the flow field into chemical equilibrium, non-equilibrium, and freezing zones, with corresponding zone-specific chemical kinetics models implemented through a zoning algorithm. Numerical simulations of cylindrical and blunt flat plate flows validate the algorithm and assess the effects of freestream conditions on zoning outcomes. Results indicate that chemical equilibrium zones predominantly form near the upstream stagnation points, while extensive chemical freezing zones develop in the downstream region. Furthermore, a simplified method based on zoning criteria for simulating chemical non-equilibrium flow fields has been proposed. This method has been validated to enhance computational efficiency while ensuring accuracy in calculations.


  • Wall temperature and radiation on separation and skin friction characteristics of hypersonic compress corner flow

    by Deyu Gai, Wei Cao

    Boundary layer separation induced by shock wave/boundary layer interaction is a critical issue in hypersonic vehicle design, where wall temperature effects cannot be neglected. Isothermal cold walls only exist during initial flight phase, while coupled aerodynamic heating and surface radiation drive walls toward radiation equilibrium temperature, whose influence on separation characteristics warrants investigation. This paper investigates the flow separation and skin friction characteristics under isothermal and radiation equilibrium wall conditions for Mach 6 flow over 15° compression ramp. Results show that surface radiation causes non-uniform wall temperature distribution along streamwise direction (decrease → increase → decrease), with flow separation enhancing streamwise attenuation of radiation equilibrium temperature. An increase in wall temperature enlarges the separation bubble, shifts the separation and reattachment points away from the corner, and reduces skin friction. Renard–Deck skin friction decomposition reveals the stage of initial shock wave interference is the key region where wall temperature affects separation characteristics. Elevated wall temperature causes the distribution of the molecular viscous dissipation (Cf1) to become smoother in this stage, reduces the peak values of the space convection term (Cf2) and streamwise heterogeneity term (Cf3), and shifts their positions toward the flat-plate leading edge. This indicates reduced momentum and adverse pressure gradient intensity in the near-wall region, leading to upstream movement of the separation point. The streamwise decay of radiation equilibrium wall temperature enhances the contribution intensity of Cf2 and Cf3, achieving the effect of suppress separation.

  • Stability and transition for long-duration hypersonic flat-plate boundary layer considering wall thermal effect

    by Deyu Gai, Wei Cao

    Current flight tests and wind tunnel experiments face challenges in obtaining long-duration hypersonic flow processes and thermal environments. Numerical simulation is an effective tool to study wall thermal effects—thermal radiation heat exchange and internal thermal conduction—and their influence on flow transition. This study employs linear stability theory (LST) and direct numerical simulation to analyze a 10-mm-thick C/SiC composite flat plate under three Mach numbers (6, 10, 15) at 30 km altitude, considering internal thermal conduction. The results of hypersonic base flow, flow stability, and transition are compared with and without surface radiation under long-duration conditions. Results demonstrate that the wall temperature ratio (Sw = Tw/T0) serves as a key indicator of wall thermal effects: larger Sw increments correlate with enhanced wall thermal effects. Surface radiation suppresses the temperature rise at the wall, resulting in decreased Sw increments. Sw (with/without radiation) decrease along the streamwise direction while increasing over time. Wall thermal effects increase boundary layer thickness and induce significant modifications to the base flow profile. Larger increments in Sw occur near the plate leading edge, indicating stronger wall thermal effects in this region. LST analysis shows that wall thermal effects shift the second-mode instability to lower frequencies, reduce maximum growth rates, and delay transition locations. Higher Mach numbers reduce the Sw increment, diminishing wall thermal effects and consequently the transition delay extent.


  • Improved two-temperature model with correction of non-Boltzmann effect for oxygen and nitrogen

    by Rui Xiong, Yufeng Han, Wei Cao

    In thermochemical nonequilibrium processes, both the nonequilibrium between different kinds of internal energy of molecules and the non-Boltzmann (NB) energy state distribution significantly impact the dissociation rate coefficients. The conventional two-temperature (2-T) model fails to accurately portray these effects, especially the NB effect. Consequently, dissociation rate coefficients calculated by the 2-T model are inaccurate in simulating strong thermochemical nonequilibrium flow, resulting in a surface heat flux inconsistent with experimental data. This article investigates the influencing factor of the NB effect on the dissociation rate coefficient using the state-to-state (STS) method during the zero-dimensional heating process of N2 and O2. Based on this, we develop a fitting formula to precisely correct the NB effect. Furthermore, we propose an improved model by integrating this fitting formula with the single-group linear maximum entropy model, which considers only the effect of nonequilibrium between different kinds of internal energy. This improved model provides an accurate description of thermochemical nonequilibrium on the dissociation rate coefficients. To validate the effectiveness of the improved model, we simulate the nonequilibrium process following a normal shock. The results demonstrate that in strong thermochemical nonequilibrium flow, compared to the 2-T Park model, the maximum and average discrepancies between the translation temperatures calculated by the improved model and those by the STS method are reduced by more than 68% and 82%, respectively. Additionally, the results closely align with experimental data, indicating that the improved model can accurately depict the effect of thermal nonequilibrium on dissociation rate coefficients.