Plastic Anisotropy Effect on Variation of Mechanical and Structural Properties of VT23 Titanium Alloy Subjected to Impact-Oscillatory Loading
Open Access
Abstract
The main regularities in the impact of varying intensity impact-oscillatory loading on the variation of the mechanical and structural properties of the VT23 high-strength two-phase transverse-rolled sheet titanium alloy have been found. The intensity of the impulse introduction of energy into the alloy under the dynamic non-equilibrium process (DNP) was estimated by εimp (the increment of dynamic strain). The pulse intensity was found to change the shape of the static strain diagram with further tensioning, as compared to the initial state. This indicates the effect from the structure self-organization inherent in the VT23 titanium alloy upon the DNP. After the DNP (εimp = 1.44%), with further static deformation, the tensile diagram revealed yield sites up to 6.5% long. In most cases, the DNP was found to have a negative effect on the variation of the mechanical properties of the VT23 titanium alloy, especially if the latter was rolled in the transverse direction. The optimal DNP intensity is εimp~1.5%. In this case, the DNP can be used as an effective plasticization technology for the VT23 titanium alloy (regardless of the rolling direction) in the stamping of high-strength titanium alloys. Changes in the mechanical and structural condition of the VT23 titanium alloy subjected to the DNP were confirmed by the fractographic investigation of specimen fractures.Keywords
Funding Information
- Scientific Grant Agency (1/0497/20, KEGA 036TUKE-4/2021, APVV-20-0303)
- The Cultural and Educational Grant Agency KEGA (1/0497/20, KEGA 036TUKE-4/2021, APVV-20-0303)
- Slovak Research and Development Agency (1/0497/20, KEGA 036TUKE-4/2021, APVV-20-0303)
This publication has 44 references indexed in Scilit:
- Fatigue cracking at twin boundaries: Effects of crystallographic orientation and stacking fault energyActa Materialia, 2012
- Alloying and heat treatment of structural (α + β) titanium alloys of high and superhigh strengthRussian Engineering Research, 2010
- High-strength titanium alloy VT23 and its applications in advanced welded and brazed structuresWelding International, 2010
- Prediction of crystallographic texture evolution and anisotropic stress–strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity modelActa Materialia, 2007
- Setup for Testing Materials with Plotting Complete Stress–Strain DiagramsStrength of Materials, 2004
- Titanium Alloys for Aerospace ApplicationsAdvanced Engineering Materials, 2003
- Titanium alloys and processing for high speed aircraftMaterials Science and Engineering: A, 1998
- Superplasticity of titanium alloys of different classesMetal Science and Heat Treatment, 1995
- Phase transformations in dual-phase titanium alloys during mechanical testing at various temperaturesMetal Science and Heat Treatment, 1988
- Effect of structure, substructure, and crystallographic texture on the mechanical properties of titanium alloysMetal Science and Heat Treatment, 1982