Induction Machine Sensorless Control Based on Saliency Extraction That Uses One Single SVPWM Active State
Open Access
- 13 January 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (2) , 2097-2106
Abstract
Some induction motors present saliencies that periodically modify the air-gap flux following a sinusoidal shape. Consequently, these modulations are reflected in the transient leakage inductance. Therefore, transient leakage inductance can be expressed as a constant term or offset, which comes from the symmetrical machine, plus all motor saliency sinusoids, modulated by the mentioned saliencies. Since saliencies are linked to the rotor position or flux, calculation of transient leakage inductance enables encoderless vector control. A way to calculate transient leakage inductance is to excite the machine with voltage steps and estimate the resulting phase current slopes since they are inversely proportional to phase transient inductance. For creating a vector, only the three current slopes resulting from a single active state are sufficient. The vector sum of the three current slopes leads to the so-called saliency-offset vector, which is a vector composed of an offset, which is created due to the contribution of the transient inductance offset, plus several saliency phasors, superposed to the offset. To access saliencies, it is critical to accurately identify the offset of the saliency-offset vector, especially in induction motors since offset is much bigger than saliencies. This article presents an advanced signal processing scheme that identifies the offset in the saliency-offset vector, assuming offset amplitude differsdepending on the voltage step applied. Using a feedforward scheme, the offset is eliminated, leading to a saliency vector where rotor slotting can be extracted from. A novel excitation is proposed to reduce additional current distortions coming from the one-active excitation.Keywords
Funding Information
- Alstom Group
- DRIVES Department
This publication has 16 references indexed in Scilit:
- Compensation of position estimation error for precise position-sensorless control of IPMSM based on high-frequency pulsating voltage injection2017
- Secondary Saliency Tracking-Based Sensorless Control for Concentrated Winding SPMSMIEEE Transactions on Industrial Informatics, 2015
- Accuracy improvement of carrier signal injection sensorless control for IPMSM in consideration of inverter nonlinearity2015
- Improved sensorless control of a permanent magnet machine using fundamental pulse width modulation excitationIET Electric Power Applications, 2011
- Sensorless Control of IPM Motors in the Low-Speed Range and at Standstill by HF Injection and DFT ProcessingIEEE Transactions on Industry Applications, 2010
- Suppression of Saturation Effects in a Sensorless Predictive Controlled Synchronous Reluctance Machine Based on Voltage Space Phasor InjectionsIEEE Transactions on Industrial Electronics, 2010
- Using PWM-Induced Transient Excitation and Advanced Signal Processing for Zero-Speed Sensorless Control of AC MachinesIEEE Transactions on Industrial Electronics, 2009
- Measurement and Adaptive Decoupling of Cross-Saturation Effects and Secondary Saliencies in Sensorless Controlled IPM Synchronous MachinesIEEE Transactions on Industry Applications, 2008
- Sensorless Position and Speed Control of Induction Motors Using High-Frequency Injection and Without Offline PrecommissioningIEEE Transactions on Industrial Electronics, 2007
- Sensorless Acquisition of the Rotor Position Angle of Induction Motors With Arbitrary Stator WindingsIEEE Transactions on Industry Applications, 2005