Experimental Investigation on the Mechanical Characteristics of Cement-Based Mortar Containing Nano-Silica, Micro-Silica, and PVA Fiber
Open Access
Abstract
This paper investigates bending and compressive strengths as mechanical characteristics of cement-based repair mortar containing nano-silica (NS) and micro-silica (SF) as cement replacements particles and polyvinyl alcohol (PVA) fibers. The mentioned materials were added to the mortar in three different conditions, including single (just one material), binary (mixture of two admixtures), and ternary (mixture of all three admixtures) modes. The use of PVA fibers, nano-silica and micro-silica in the triple combination of a cement-based mortar is the primary objective of the current research. In total, 28 mix designs with various percentages of particles and fiber were employed in the current study, and 112 different specimens were prepared to conduct the experimental research. The compressive and flexural strength results have been selected as the criteria for obtaining the optimum mix design for each condition. In order to specify the mechanical characteristics of specimens, a compressive test was carried out according to ACI 318, and the three-point bending test was utilized according to BS EN 1015-11. The results obtained from this study show that the mixture containing 10% silica fume (SF10) can be considered the optimum mix design for the single-mode condition. For such a mix design, a flexural strength increase of 27% and a compressive strength improvement of 48% were determined in comparison to the reference mixture design. The mixture containing nano-silica at 2% and silica fume at 8% (NS2SF8) was the optimum mix design in the binary mode condition. With the current mix design, a flexural strength improvement of 24% and a compressive strength increase of 49% in a 28-day specimen were recorded. Finally, under the ternary mode condition, a flexural strength enhancement of 3.5% and a compressive strength improvement of 4.6% were obtained. Additionally, the mixture design containing a PVA content of 0.75% and an SF content of 10% (PVA0.75SF10) was considered optimum.Keywords
This publication has 39 references indexed in Scilit:
- Impact resistance of hybrid-fiber engineered cementitious composite panelsComposite Structures, 2013
- Effect of nano-SiO2, nano-Al2O3 and nano-Fe2O3 powders on compressive strengths and capillary water absorption of cement mortar containing fly ash: A comparative studyEnergy and Buildings, 2013
- Nanotechnology in concrete – A reviewConstruction and Building Materials, 2010
- Properties of concrete prepared with PVA-impregnated recycled concrete aggregatesCement and Concrete Composites, 2010
- Characteristics of cement mortar with nano-SiO2 particlesConstruction and Building Materials, 2007
- Mortars for Repair of Traditional MasonryPractice Periodical on Structural Design and Construction, 2004
- Microstructure of cement mortar with nano-particlesComposites Part B: Engineering, 2004
- Mechanical properties and durability characteristics of polymer- and cement-based repair materialsCement and Concrete Composites, 2003
- Laboratory and field performance of polymer-modified cement-based repair mortars in cold climatesConstruction and Building Materials, 2002
- Measuring and Modifying Interface Properties of PVA Fibers in ECC MatrixJournal of Materials in Civil Engineering, 2001