DECISION-MAKING SUBSYSTEM OF THE CONTROL SYSTEM FOR ABSORPTION REFRIGERATION UNITS IN AMMONIA PRODUCTION

Authors:

Abstract
It is shown that in the technological complex of secondary condensation in ammonia production, seasonal and daily fluctuations of ambient air temperature change the heat removal conditions in air-cooled condensers, which leads to deviations of ammonia vapor condensation pressure and disturbs the stability of generation, rectification, and condensation modes. The consequences of such disturbances for the operation of jet compressors are analyzed, in particular the variation of the injection coefficient and the need for prompt coordination of the motive steam flow rate with the current condensation parameters. An approach to supervisory control is considered, within which the decision-making subsystem generates recommendations for the operator on switching individual jet compressors on or off and setting the motive steam flow rate based on the calculated assessment of the injection coefficient. Emphasis is placed on the algorithmic support based on a mathematical description of a single-phase jet compressor with a cylindrical mixing chamber and the use of gas-dynamic functions to determine limiting regimes and convergent computational procedures. It is confirmed that the proposed sequence of calculations makes it possible to coordinate the motive steam flow rate with changes in temperature and condensation pressure in air-cooled units and provides a formalized selection of the number of operating jet compressors under off-design conditions. The algorithm is implemented in the MATLAB software environment, and its validation is carried out using experimental data from industrial operation. The obtained results demonstrate the possibility of rapid switching of jet compressor configurations depending on condensation conditions and the calculated injection coefficient, which contributes to a reduction in electricity and natural gas consumption and improves the reproducibility of control decisions in the supervisory loop.