Thermodynamic feasibility analysis of a newly modified absorption power cycle running with LiBr‐water
- 8 July 2020
- journal article
- research article
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 40 (1)
Abstract
This study thermodynamically evaluates a newly modified absorption power cycle (APC) working with Lithium Bromide–Water (LiBr‐H2O) solution and compares it with the conventional Rankine, one‐stage, and three‐stage APC systems. An additional steam condenser is integrated to the conventional APC and part of pure water is extracted and pumped back to the high‐pressure side without passing through the absorber of the cycle. In order to specify the best system parameters, parametric optimization of all configurations is evaluated. The Rankine cycle and the modified APC have better thermodynamic performances than those of the conventional and the three‐stage APC at generator temperatures. The conventional APC is found to improve the cycle performance at low generator pressure. However, the efficiencies of this cycle start to decrease when generator pressure increases. In contrast, the Rankine cycle and the modified APC have larger working ranges of generator pressure.Keywords
This publication has 26 references indexed in Scilit:
- Comprehensive review on the techno-economics of sustainable large-scale clean hydrogen productionJournal of Cleaner Production, 2019
- Energy and exergy analysis of an absorption power cycleApplied Thermal Engineering, 2013
- Exergetic and economic comparison of ORC and Kalina cycle for low temperature enhanced geothermal system in BrazilApplied Thermal Engineering, 2013
- Low-grade heat conversion into power using organic Rankine cycles – A review of various applicationsRenewable and Sustainable Energy Reviews, 2011
- Working fluids for low-temperature heat sourceApplied Thermal Engineering, 2010
- Integration of Kalina cycle in a combined heat and power plant, a case studyApplied Thermal Engineering, 2009
- Fluid selection for a low-temperature solar organic Rankine cycleApplied Thermal Engineering, 2009
- Parametric analysis and optimization for a combined power and refrigeration cycleApplied Energy, 2008
- Simulation of a combined Rankine–absorption cycleApplied Thermal Engineering, 2004
- Combined Cycle and Waste Heat Recovery Power Systems Based on a Novel Thermodynamic Energy Cycle Utilizing Low-Temperature Heat for Power Generation1983