SYSalem A. Yosaf

Salem A. Yosaf

*This is an algorithmically generated author record based on publicly available information.

Salem A. Yosaf has a total of 4 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermoeconomic Assessments of Green Hydrogen Production Via PV&PEM Electrolyzer:

    by Salem Yosaf, Hamoda Gnaifaid, Assad Mizda

    The study aims to estimate the amount and cost of hydrogen and oxygen that can be produced in the Al-Jufra region (Libya) using photovoltaic panels (PV). The electricity generated by PV is used to power the proton exchange membrane (PEM) electrolyzer. Through the study, the thermal efficiency of the system is calculated, as well as the factors affecting it. The amount of solar radiation that the region receives during the year is also determined, amounting to 81.72 kW/year m2, with a duration of 3421 daylight hours. With this radiation value, it is possible to produce 1272 and 636 mol/year m2 of hydrogen and oxygen, respectively, at an estimated cost of $1.42 per mole. Thermodynamic analysis of PV cells and electrolyzer shows that the electrical efficiency and exergy efficiency of PV cells are 4.8% and 5%, respectively, and vary according to the radiation intensity. The exergy and energy efficiency of the analyzer remained constant at 48% and 39%, respectively, according to the aforementioned arrangement. The decrease in the efficiency of PV energy efficiency affects the overall efficiency of the system and does not exceed 3% in ideal conditions. In addition, the expected cost in 2030 is estimated and found to be 5.77% lower than its current price. Comparing the amount and price of production in the Al-Jufra area with other areas in Libya, it becomes clear that the city of Al-Kufra has a 20% higher annual production amount.


  • Thermodynamic feasibility analysis of a newly modified absorption power cycle running with LiBr‐water

    by Alperen Tozlu, Salem A. Yosaf, Hasan Özcan

    This study thermodynamically evaluates a newly modified absorption power cycle (APC) working with Lithium Bromide–Water (LiBr‐H2O) solution and compares it with the conventional Rankine, one‐stage, and three‐stage APC systems. An additional steam condenser is integrated to the conventional APC and part of pure water is extracted and pumped back to the high‐pressure side without passing through the absorber of the cycle. In order to specify the best system parameters, parametric optimization of all configurations is evaluated. The Rankine cycle and the modified APC have better thermodynamic performances than those of the conventional and the three‐stage APC at generator temperatures. The conventional APC is found to improve the cycle performance at low generator pressure. However, the efficiencies of this cycle start to decrease when generator pressure increases. In contrast, the Rankine cycle and the modified APC have larger working ranges of generator pressure.