Prediction of Flame Burning Velocity at Early Flame Development Time With High Exhaust Gas Recirculation and Spark Advance
- 21 March 2017
- journal article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 139 (8) , 082801
Abstract
Diluting spark-ignited (SI) stoichiometric combustion engines with excess residual gas improves thermal efficiency and allows the spark to be advanced toward maximum brake torque (MBT) timing. However, flame propagation rates decrease and misfires can occur at high exhaust gas recirculation (EGR) conditions and advanced spark, limiting the maximum level of charge dilution and its benefits. The misfire limits are often determined for a specific engine from extensive experiments covering a large range of speed, torque, and actuator settings. To extend the benefits of dilute combustion while at the misfire limit, it is essential to define a parameterizable, physics-based model capable of predicting the misfire limits, with cycle to cycle varied flame burning velocity as operating conditions change based on the driver demand. A cycle-averaged model is the first step in this process. The current work describes a model of cycle-averaged laminar flame burning velocity within the early flame development period of 0–3% mass fraction burned. A flame curvature correction method is used to account for both the effect of flame stretch and ignition characteristics, in a variable volume engine system. Comparison of the predicted and the measured flame velocity was performed using a spark plug with fiber optical access. The comparison at a small set of spark and EGR settings at fixed load and speed, shows an agreement within 30% of uncertainty, while 20% uncertainty equals ± one standard deviation over 2000 cycles.Keywords
This publication has 12 references indexed in Scilit:
- A computational study and correlation of premixed isooctane air laminar reaction fronts diluted with EGRCombustion and Flame, 2012
- Modelling and Simulation of the Combustion of Ethanol blended Fuels in a SI Engine using a 0D Coherent Flame ModelSAE International Journal of Advances and Current Practices in Mobility, 2009
- Theoretical analysis of the evolution from ignition kernel to flame ball and planar flameCombustion Theory and Modelling, 2007
- Turbulent Combustion2000
- The Effects of Initial Flame Kernel Conditions on Flame Development in SI EngineSAE International Journal of Advances and Current Practices in Mobility, 1991
- A Theoretical Study of Propagation and Extinction of Nonsteady Spherical Flame FrontsSIAM Journal on Applied Mathematics, 1989
- An integral analysis of the structure and propagation of stretched premixed flamesCombustion and Flame, 1988
- What Limits Lean Operation in Spark Ignition Engines-Flame Initiation or Propagation?SAE International Journal of Advances and Current Practices in Mobility, 1976
- Thermophysical properties of A-72 gasoline at various temperatures and pressuresChemistry and Technology of Fuels and Oils, 1974
- Determination of burning velocities: A critical reviewCombustion and Flame, 1972