Characterization of fused deposition modeling components fabricated at different print orientations
- 20 April 2023
- journal article
- research article
- Published by IOP Publishing in Engineering Research Express
- Vol. 5 (2) , 025019
Abstract
The quality of the components fabricated using fusion deposition modelling (FDM) can be tailored by the proper selection of process parameters values. Print orientation is a key process parameter in FDM which has a strong influence on defect formation and thereby mechanical properties of the components. To address the influence of print orientation, FDM of Polyethylene terephthalate glycol (PETG) samples were fabricated and tested. The samples were fabricated using different print orientations namely 0°, 45°, 90° and combination of 45° and 135° alternatively. From the investigation, it was inferred that the print orientation is crucial in deciding the part properties attributing towards the load bearing capacity of print seams. The print orientation of 90° exhibit higher strength by exhibiting peak load values of 942 N and higher elongation of 128 mm. The elongation capability is more than 40 times higher than the 0°, 45°, and 45°/135° orientations which is attributed to the availability of continuous and longer print seam that supports load bearing and elongation.Keywords
This publication has 19 references indexed in Scilit:
- A focused simulation-based optimization of print time and material usage with respect to orientation, layer height and support settings for multi-pathological anatomical models in inverted vat photopolymerization 3D printing3D Printing in Medicine, 2021
- Experimental investigation on mechanical characterization of 3D printed PLA produced by fused deposition modeling (FDM)Materials Research Express, 2021
- Multi-objective optimization of process parameters of Fused Deposition Modeling (FDM) for printing Polylactic Acid (PLA) polymer componentsMaterials Today: Proceedings, 2021
- Anisotropic material behavior of 3D printed composite structures – Material extrusion additive manufacturingMaterials & Design, 2020
- A review on advancements in applications of fused deposition modelling processRapid Prototyping Journal, 2020
- Effect of variable infill density on mechanical behaviour of 3-D printed PLA specimen: an experimental investigationSN Applied Sciences, 2019
- The effects of printing orientation on the electrochemical behaviour of 3D printed acrylonitrile butadiene styrene (ABS)/carbon black electrodesScientific Reports, 2018
- Experimental Optimization of Fused Deposition Modelling Processing Parameters: A Design-for-Manufacturing ApproachProcedia Manufacturing, 2017
- Influence of processing and orientation print effects on the mechanical and thermal behavior of 3D-Printed ULTEM® 9085 MaterialAdditive Manufacturing, 2017
- Fractographic analysis of tensile failure of acrylonitrile-butadiene-styrene fabricated by fused deposition modelingAdditive Manufacturing, 2016