Experimental Investigation on the Mechanical Properties and Microstructure of Basalt Fiber Reinforced Engineered Cementitious Composite
Open Access
Abstract
This study investigated fundamental mechanical properties of a basalt fiber reinforced engineered cementitious composite (BF-ECC) with different volume fractions of basalt fiber (BF), water–binder ratio (W/B) and fly ash (FA) content. The compressive strength, splitting tensile strength, flexural strength and static modulus of BF-ECC were studied at 3, 28 and 56 days, respectively, to explore their development along the ages. Furthermore, the scanning electron microscopy (SEM) analysis was conducted to evaluate the microstructure of BF-ECC. Experiment results demonstrated that bond quality between the BF and the matrix is good, which leads to a significant increase in the flexural strength and splitting tensile strength. The pozzolanic effect of FA obviously improved the splitting tensile and flexural strength of BF-ECC after 56 days of curing, and the appropriate content of the FA content in the BF-ECC ranges from 50% to 60%.Keywords
Funding Information
- Fundamental Research Funds for the Central Universities (300102238303, 300102239617)
- the Key Research and Development Program of Shaanxi Province (2020SF-388)
This publication has 35 references indexed in Scilit:
- Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibersJournal of Building Engineering, 2020
- Effect of water to binder ratio and sand to binder ratio on shrinkage and mechanical properties of High-strength Engineered Cementitious CompositeConstruction and Building Materials, 2019
- Performance and composition analysis of engineered cementitious composite (ECC) – A reviewJournal of Building Engineering, 2019
- Optimization of hybrid fibres in engineered cementitious compositesConstruction and Building Materials, 2018
- Rate-dependent tensile properties of ultra-high performance engineered cementitious composites (UHP-ECC)Cement and Concrete Composites, 2018
- Tensile performance of sustainable Strain-Hardening Cementitious Composites with hybrid PVA and recycled PET fibersCement and Concrete Research, 2018
- Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concreteComposite Structures, 2018
- Mechanical behaviour of a polyvinyl alcohol fibre reinforced engineered cementitious composite (PVA-ECC) using local ingredientsConstruction and Building Materials, 2017
- Study on fiber hybridization effect of engineered cementitious composites with low- and high-modulus polymeric fibersConstruction and Building Materials, 2016
- The effect of hybridization and geometry of polypropylene fibers on engineered cementitious composites reinforced by polyvinyl alcohol fibersJournal of Composite Materials, 2015