Abstract
Real-time microflow velocity measurement is important in microfluidic systems where it regulates biochemical processes and in biomedical applications, where it indicates physiological state.,In this study, an optical fibre microflow sensor was developed based on a Fabry–Pérot interferometer (FPI) formed by a single-mode fibre (SMF) and a gold nanoparticle (AuNP)-functionalised silica capillary tube (SCT) that is partially filled with a copper oxide nanoparticle (CuONP)-embedded polydimethylsiloxane (PDMS)(CuO@PDMS) composite.,The AuNPs and CuONPs enhance the absorption of red laser light and generate heat, which the microfluid removes via convective heat transfer, establishing thermal equilibrium. Compared with AuNPs or CuONPs alone, the combination of both materials enhances the thermal absorption efficiency. Additionally, PDMS exhibits a high thermal expansion coefficient, which makes it highly responsive to temperature variations. The sensing principle follows the hot-wire flowmeter concept, in which convective heat transfer between the heated element and the surrounding fluid induces temperature changes that modify the PDMS volume and shift the FPI fringes, establishing correlation between flow velocity and heat dissipation.,Experimental evaluations were performed to characterise temperature sensitivity and nanoparticle-induced heating, and to examine the relationship between flow rate and wavelength shift. Based on the hot-wire flowmeter principle, monitoring the wavelength shift of the interference fringes enabled accurate measurement of microflow velocities ranging from 1.3 μL/s to 14.25 μL/s. The sensor demonstrated high temperature sensitivity of up to 8.71 nm/°C, good repeatability, and compactness. This method shows potential for in vivo biomedical diagnostics, particularly in narrow spaces requiring high-precision flow-rate detection.

This publication has 18 references indexed in Scilit: